GNU Octave: Printing and Saving Plots

15.2.9 Printing and Saving Plots

The print command allows you to send plots to you printer and to save plots in a variety of formats. For example,

print -dpsc

prints the current figure to a color PostScript printer. And,

print -deps foo.eps

saves the current figure to an encapsulated PostScript file called foo.eps.

The different graphic toolkits have different print capabilities. In particular, the OpenGL based toolkits such as fltk do not support the "interpreter" property of text objects. This means special symbols drawn with the "tex" interpreter will appear correctly on-screen but will be rendered with interpreter "none" when printing. Switch graphics toolkits for printing if this is a concern.

Function File: print ()

Function File: print (options)

Function File: print (filename, options)

Function File: print (h, filename, options)

Print a plot, or save it to a file.

Both output formatted for printing (PDF and PostScript), and many bitmapped and vector image formats are supported.

filename defines the name of the output file. If the file name has no suffix, one is inferred from the specified device and appended to the file name. If no filename is specified, the output is sent to the printer.

h specifies the handle of the figure to print. If no handle is specified the current figure is used.

For output to a printer, PostScript file, or PDF file, the paper size is specified by the figure’s papersize property. The location and size of the image on the page are specified by the figure’s paperposition property. The orientation of the page is specified by the figure’s paperorientation property.

The width and height of images are specified by the figure’s paperpositon(3:4) property values.

The print command supports many options:

-fh

Specify the handle, h, of the figure to be printed. The default is the current figure.

-Pprinter

Set the printer name to which the plot is sent if no filename is specified.

-Gghostscript_command

Specify the command for calling Ghostscript. For Unix and Windows the defaults are "gs" and "gswin32c", respectively.

-color

-mono

Color or monochrome output.

-solid

-dashed

Force all lines to be solid or dashed, respectively.

-portrait

-landscape

Specify the orientation of the plot for printed output. For non-printed output the aspect ratio of the output corresponds to the plot area defined by the "paperposition" property in the orientation specified. This option is equivalent to changing the figure’s "paperorientation" property.

-TextAlphaBits=n

-GraphicsAlphaBits=n

Octave is able to produce output for various printers, bitmaps, and vector formats by using Ghostscript. For bitmap and printer output anti-aliasing is applied using Ghostscript’s TextAlphaBits and GraphicsAlphaBits options. The default number of bits for each is 4. Allowed values for N are 1, 2, or 4.

-ddevice

The available output format is specified by the option device, and is one of:

ps
ps2
psc
psc2: PostScript (level 1 and 2, mono and color). The FLTK graphics toolkit generates PostScript level 3.0.
eps
eps2
epsc
epsc2: Encapsulated PostScript (level 1 and 2, mono and color). The FLTK graphic toolkit generates PostScript level 3.0.
pslatex
epslatex
pdflatex
pslatexstandalone
epslatexstandalone
pdflatexstandalone: Generate a LaTeX file filename.tex for the text portions of a plot and a file filename.(ps|eps|pdf) for the remaining graphics. The graphics file suffix .ps|eps|pdf is determined by the specified device type. The LaTeX file produced by the ‘standalone’ option can be processed directly by LaTeX. The file generated without the ‘standalone’ option is intended to be included from another LaTeX document. In either case, the LaTeX file contains an \includegraphics command so that the generated graphics file is automatically included when the LaTeX file is processed. The text that is written to the LaTeX file contains the strings exactly as they were specified in the plot. If any special characters of the TeX mode interpreter were used, the file must be edited before LaTeX processing. Specifically, the special characters must be enclosed with dollar signs ( $ … $ ), and other characters that are recognized by LaTeX may also need editing (.e.g., braces). The ‘pdflatex’ device, and any of the ‘standalone’ formats, are not available with the Gnuplot toolkit.
tikz: Generate a LaTeX file using PGF/TikZ. For the FLTK toolkit the result is PGF.
ill
aifm: Adobe Illustrator (Obsolete for Gnuplot versions > 4.2)
cdr
corel: CorelDraw
dxf: AutoCAD
emf
meta: Microsoft Enhanced Metafile
fig: XFig. For the Gnuplot graphics toolkit, the additional options -textspecial or -textnormal can be used to control whether the special flag should be set for the text in the figure. (default is -textnormal)
hpgl: HP plotter language
mf: Metafont
png: Portable network graphics
jpg
jpeg: JPEG image
gif: GIF image (only available for the Gnuplot graphics toolkit)
pbm: PBMplus
svg: Scalable vector graphics
pdf: Portable document format

If the device is omitted, it is inferred from the file extension, or if there is no filename it is sent to the printer as PostScript.

-dghostscript_device

Additional devices are supported by Ghostscript. Some examples are;

pdfwrite: Produces pdf output from eps
ljet2p: HP LaserJet IIP
pcx24b: 24-bit color PCX file format
ppm: Portable Pixel Map file format

For a complete list, type system ("gs -h") to see what formats and devices are available.

When Ghostscript output is sent to a printer the size is determined by the figure’s "papersize" property. When the output is sent to a file the size is determined by the plot box defined by the figure’s "paperposition" property.

-append

Append PostScript or PDF output to a pre-existing file of the same type.

-rNUM

Resolution of bitmaps in pixels per inch. For both metafiles and SVG the default is the screen resolution; for other formats it is 150 dpi. To specify screen resolution, use "-r0".

-loose

-tight

Force a tight or loose bounding box for eps files. The default is loose.

-preview

Add a preview to eps files. Supported formats are:

-interchange: Provide an interchange preview.
-metafile: Provide a metafile preview.
-pict: Provide pict preview.
-tiff: Provide a tiff preview.

-Sxsize,ysize

Plot size in pixels for EMF, GIF, JPEG, PBM, PNG, and SVG. For PS, EPS, PDF, and other vector formats the plot size is in points. This option is equivalent to changing the size of the plot box associated with the "paperposition" property. When using the command form of the print function you must quote the xsize,ysize option. For example, by writing "-S640,480".

-Ffontname

-Ffontname:size

-F:size

Use fontname and/or fontsize for all text. fontname is ignored for some devices: dxf, fig, hpgl, etc.

The filename and options can be given in any order.

Example: Print to a file using the pdf device.

figure (1);
clf ();
surf (peaks);
print figure1.pdf

Example: Print to a file using jpg device.

clf ();
surf (peaks);
print -djpg figure2.jpg

Example: Print to printer named PS_printer using ps format.

clf ();
surf (peaks);
print -dpswrite -PPS_printer

See also: saveas, hgsave, orient, figure.

Function File: saveas (h, filename)

Function File: saveas (h, filename, fmt)

Save graphic object h to the file filename in graphic format fmt.

fmt should be one of the following formats:

ps: PostScript
eps: Encapsulated PostScript
jpg: JPEG Image
png: PNG Image
emf: Enhanced Meta File
pdf: Portable Document Format

All device formats specified in print may also be used. If fmt is omitted it is extracted from the extension of filename. The default format is "pdf".

clf ();
surf (peaks);
saveas (1, "figure1.png");

See also: print, hgsave, orient.

Function File: orient (orientation)

Function File: orient (hfig, orientation)

Function File: orientation = orient ()

Function File: orientation = orient (hfig)

Query or set the print orientation for figure hfig.

Valid values for orientation are "portrait", "landscape", and "tall".

The "landscape" option changes the orientation so the plot width is larger than the plot height. The "paperposition" is also modified so that the plot fills the page, while leaving a 0.25 inch border.

The "tall" option sets the orientation to "portrait" and fills the page with the plot, while leaving a 0.25 inch border.

The "portrait" option (default) changes the orientation so the plot height is larger than the plot width. It also restores the default "paperposition" property.

When called with no arguments, return the current print orientation.

If the argument hfig is omitted, then operate on the current figure returned by gcf.

See also: print, saveas.

print and saveas are used when work on a plot has finished and the output must be in a publication-ready format. During intermediate stages it is often better to save the graphics object and all of its associated information so that changes—to colors, axis limits, marker styles, etc.—can be made easily from within Octave. The hgsave/hgload commands can be used to save and re-create a graphics object.

Function File: hgsave (filename)

Function File: hgsave (h, filename)

Function File: hgsave (h, filename, fmt)

Save the graphics handle h to the file filename in the format fmt.

If unspecified, h is the current figure as returned by gcf.

When filename does not have an extension the default filename extension .ofig will be appended.

If present, fmt should be one of the following:

-binary, -float-binary
-hdf5, -float-hdf5
-V7, -v7, -7, -mat7-binary
-V6, -v6, -6, -mat6-binary
-text
-zip, -z

When producing graphics for final publication use print or saveas. When it is important to be able to continue to edit a figure as an Octave object, use hgsave/hgload.

See also: hgload, hdl2struct, saveas, print.

Function File: h = hgload (filename)

Load the graphics object in filename into the graphics handle h.

If filename has no extension, Octave will try to find the file with and without the standard extension of .ofig.

See also: hgsave, struct2hdl.