Next: , Previous: , Up: Linear Algebra   [Contents][Index]


18.2 Basic Matrix Functions

Built-in Function: AA = balance (A)
Built-in Function: AA = balance (A, opt)
Built-in Function: [DD, AA] = balance (A, opt)
Built-in Function: [D, P, AA] = balance (A, opt)
Built-in Function: [CC, DD, AA, BB] = balance (A, B, opt)

Balance the matrix A to reduce numerical errors in future calculations.

Compute AA = DD \ A * DD in which AA is a matrix whose row and column norms are roughly equal in magnitude, and DD = P * D, in which P is a permutation matrix and D is a diagonal matrix of powers of two. This allows the equilibration to be computed without round-off. Results of eigenvalue calculation are typically improved by balancing first.

If two output values are requested, balance returns the diagonal D and the permutation P separately as vectors. In this case, DD = eye(n)(:,P) * diag (D), where n is the matrix size.

If four output values are requested, compute AA = CC*A*DD and BB = CC*B*DD, in which AA and BB have nonzero elements of approximately the same magnitude and CC and DD are permuted diagonal matrices as in DD for the algebraic eigenvalue problem.

The eigenvalue balancing option opt may be one of:

"noperm", "S"

Scale only; do not permute.

"noscal", "P"

Permute only; do not scale.

Algebraic eigenvalue balancing uses standard LAPACK routines.

Generalized eigenvalue problem balancing uses Ward’s algorithm (SIAM Journal on Scientific and Statistical Computing, 1981).

Function File: bw = bandwidth (A, type)
Function File: [lower, upper] = bandwidth (A)

Compute the bandwidth of A.

The type argument is the string "lower" for the lower bandwidth and "upper" for the upper bandwidth. If no type is specified return both the lower and upper bandwidth of A.

The lower/upper bandwidth of a matrix is the number of subdiagonals/superdiagonals with nonzero entries.

See also: isbanded, isdiag, istril, istriu.

Function File: cond (A)
Function File: cond (A, p)

Compute the p-norm condition number of a matrix.

cond (A) is defined as norm (A, p) * norm (inv (A), p).

By default, p = 2 is used which implies a (relatively slow) singular value decomposition. Other possible selections are p = 1, Inf, "fro" which are generally faster. See norm for a full discussion of possible p values.

The condition number of a matrix quantifies the sensitivity of the matrix inversion operation when small changes are made to matrix elements. Ideally the condition number will be close to 1. When the number is large this indicates small changes (such as underflow or round-off error) will produce large changes in the resulting output. In such cases the solution results from numerical computing are not likely to be accurate.

See also: condest, rcond, norm, svd.

Built-in Function: det (A)
Built-in Function: [d, rcond] = det (A)

Compute the determinant of A.

Return an estimate of the reciprocal condition number if requested.

Programming Notes: Routines from LAPACK are used for full matrices and code from UMFPACK is used for sparse matrices.

The determinant should not be used to check a matrix for singularity. For that, use any of the condition number functions: cond, condest, rcond.

See also: cond, condest, rcond.

Built-in Function: lambda = eig (A)
Built-in Function: lambda = eig (A, B)
Built-in Function: [V, lambda] = eig (A)
Built-in Function: [V, lambda] = eig (A, B)

Compute the eigenvalues (and optionally the eigenvectors) of a matrix or a pair of matrices

The algorithm used depends on whether there are one or two input matrices, if they are real or complex, and if they are symmetric (Hermitian if complex) or non-symmetric.

The eigenvalues returned by eig are not ordered.

See also: eigs, svd.

Built-in Function: G = givens (x, y)
Built-in Function: [c, s] = givens (x, y)

Compute the Givens rotation matrix G.

The Givens matrix is a 2 by 2 orthogonal matrix

g = [c s; -s' c]

such that

g [x; y] = [*; 0]

with x and y scalars.

If two output arguments are requested, return the factors c and s rather than the Givens rotation matrix.

For example:

givens (1, 1)
   ⇒   0.70711   0.70711
       -0.70711   0.70711

See also: planerot.

Function File: [G, y] = planerot (x)

Given a two-element column vector, return the 2 by 2 orthogonal matrix G such that y = g * x and y(2) = 0.

See also: givens.

Built-in Function: x = inv (A)
Built-in Function: [x, rcond] = inv (A)

Compute the inverse of the square matrix A.

Return an estimate of the reciprocal condition number if requested, otherwise warn of an ill-conditioned matrix if the reciprocal condition number is small.

In general it is best to avoid calculating the inverse of a matrix directly. For example, it is both faster and more accurate to solve systems of equations (A*x = b) with y = A \ b, rather than y = inv (A) * b.

If called with a sparse matrix, then in general x will be a full matrix requiring significantly more storage. Avoid forming the inverse of a sparse matrix if possible.

See also: ldivide, rdivide.

Function File: x = linsolve (A, b)
Function File: x = linsolve (A, b, opts)
Function File: [x, R] = linsolve (…)

Solve the linear system A*x = b.

With no options, this function is equivalent to the left division operator (x = A \ b) or the matrix-left-divide function (x = mldivide (A, b)).

Octave ordinarily examines the properties of the matrix A and chooses a solver that best matches the matrix. By passing a structure opts to linsolve you can inform Octave directly about the matrix A. In this case Octave will skip the matrix examination and proceed directly to solving the linear system.

Warning: If the matrix A does not have the properties listed in the opts structure then the result will not be accurate AND no warning will be given. When in doubt, let Octave examine the matrix and choose the appropriate solver as this step takes little time and the result is cached so that it is only done once per linear system.

Possible opts fields (set value to true/false):

LT

A is lower triangular

UT

A is upper triangular

UHESS

A is upper Hessenberg (currently makes no difference)

SYM

A is symmetric or complex Hermitian (currently makes no difference)

POSDEF

A is positive definite

RECT

A is general rectangular (currently makes no difference)

TRANSA

Solve A'*x = b by transpose (A) \ b

The optional second output R is the inverse condition number of A (zero if matrix is singular).

See also: mldivide, matrix_type, rcond.

Built-in Function: type = matrix_type (A)
Built-in Function: type = matrix_type (A, "nocompute")
Built-in Function: A = matrix_type (A, type)
Built-in Function: A = matrix_type (A, "upper", perm)
Built-in Function: A = matrix_type (A, "lower", perm)
Built-in Function: A = matrix_type (A, "banded", nl, nu)

Identify the matrix type or mark a matrix as a particular type.

This allows more rapid solutions of linear equations involving A to be performed.

Called with a single argument, matrix_type returns the type of the matrix and caches it for future use.

Called with more than one argument, matrix_type allows the type of the matrix to be defined.

If the option "nocompute" is given, the function will not attempt to guess the type if it is still unknown. This is useful for debugging purposes.

The possible matrix types depend on whether the matrix is full or sparse, and can be one of the following

"unknown"

Remove any previously cached matrix type, and mark type as unknown.

"full"

Mark the matrix as full.

"positive definite"

Probable full positive definite matrix.

"diagonal"

Diagonal matrix. (Sparse matrices only)

"permuted diagonal"

Permuted Diagonal matrix. The permutation does not need to be specifically indicated, as the structure of the matrix explicitly gives this. (Sparse matrices only)

"upper"

Upper triangular. If the optional third argument perm is given, the matrix is assumed to be a permuted upper triangular with the permutations defined by the vector perm.

"lower"

Lower triangular. If the optional third argument perm is given, the matrix is assumed to be a permuted lower triangular with the permutations defined by the vector perm.

"banded"
"banded positive definite"

Banded matrix with the band size of nl below the diagonal and nu above it. If nl and nu are 1, then the matrix is tridiagonal and treated with specialized code. In addition the matrix can be marked as probably a positive definite. (Sparse matrices only)

"singular"

The matrix is assumed to be singular and will be treated with a minimum norm solution.

Note that the matrix type will be discovered automatically on the first attempt to solve a linear equation involving A. Therefore matrix_type is only useful to give Octave hints of the matrix type. Incorrectly defining the matrix type will result in incorrect results from solutions of linear equations; it is entirely the responsibility of the user to correctly identify the matrix type.

Also, the test for positive definiteness is a low-cost test for a Hermitian matrix with a real positive diagonal. This does not guarantee that the matrix is positive definite, but only that it is a probable candidate. When such a matrix is factorized, a Cholesky factorization is first attempted, and if that fails the matrix is then treated with an LU factorization. Once the matrix has been factorized, matrix_type will return the correct classification of the matrix.

Built-in Function: norm (A)
Built-in Function: norm (A, p)
Built-in Function: norm (A, p, opt)

Compute the p-norm of the matrix A.

If the second argument is missing, p = 2 is assumed.

If A is a matrix (or sparse matrix):

p = 1

1-norm, the largest column sum of the absolute values of A.

p = 2

Largest singular value of A.

p = Inf or "inf"

Infinity norm, the largest row sum of the absolute values of A.

p = "fro"

Frobenius norm of A, sqrt (sum (diag (A' * A))).

other p, p > 1

maximum norm (A*x, p) such that norm (x, p) == 1

If A is a vector or a scalar:

p = Inf or "inf"

max (abs (A)).

p = -Inf

min (abs (A)).

p = "fro"

Frobenius norm of A, sqrt (sumsq (abs (A))).

p = 0

Hamming norm - the number of nonzero elements.

other p, p > 1

p-norm of A, (sum (abs (A) .^ p)) ^ (1/p).

other p p < 1

the p-pseudonorm defined as above.

If opt is the value "rows", treat each row as a vector and compute its norm. The result is returned as a column vector. Similarly, if opt is "columns" or "cols" then compute the norms of each column and return a row vector.

See also: cond, svd.

Function File: null (A)
Function File: null (A, tol)

Return an orthonormal basis of the null space of A.

The dimension of the null space is taken as the number of singular values of A not greater than tol. If the argument tol is missing, it is computed as

max (size (A)) * max (svd (A)) * eps

See also: orth.

Function File: orth (A)
Function File: orth (A, tol)

Return an orthonormal basis of the range space of A.

The dimension of the range space is taken as the number of singular values of A greater than tol. If the argument tol is missing, it is computed as

max (size (A)) * max (svd (A)) * eps

See also: null.

Built-in Function: [y, h] = mgorth (x, v)

Orthogonalize a given column vector x with respect to a set of orthonormal vectors comprising the columns of v using the modified Gram-Schmidt method.

On exit, y is a unit vector such that:

  norm (y) = 1
  v' * y = 0
  x = [v, y]*h'
Built-in Function: pinv (x)
Built-in Function: pinv (x, tol)

Return the pseudoinverse of x.

Singular values less than tol are ignored.

If the second argument is omitted, it is taken to be

tol = max (size (x)) * sigma_max (x) * eps,

where sigma_max (x) is the maximal singular value of x.

Function File: rank (A)
Function File: rank (A, tol)

Compute the rank of matrix A, using the singular value decomposition.

The rank is taken to be the number of singular values of A that are greater than the specified tolerance tol. If the second argument is omitted, it is taken to be

tol = max (size (A)) * sigma(1) * eps;

where eps is machine precision and sigma(1) is the largest singular value of A.

The rank of a matrix is the number of linearly independent rows or columns and determines how many particular solutions exist to a system of equations. Use null for finding the remaining homogenous solutions.

Example:

x = [1 2 3
     4 5 6
     7 8 9];
rank (x)
  ⇒ 2

The number of linearly independent rows is only 2 because the final row is a linear combination of -1*row1 + 2*row2.

See also: null, sprank, svd.

Built-in Function: c = rcond (A)

Compute the 1-norm estimate of the reciprocal condition number as returned by LAPACK.

If the matrix is well-conditioned then c will be near 1 and if the matrix is poorly conditioned it will be close to 0.

The matrix A must not be sparse. If the matrix is sparse then condest (A) or rcond (full (A)) should be used instead.

See also: cond, condest.

Function File: trace (A)

Compute the trace of A, the sum of the elements along the main diagonal.

The implementation is straightforward: sum (diag (A)).

See also: eig.

Function File: rref (A)
Function File: rref (A, tol)
Function File: [r, k] = rref (…)

Return the reduced row echelon form of A.

tol defaults to eps * max (size (A)) * norm (A, inf).

The optional return argument k contains the vector of "bound variables", which are those columns on which elimination has been performed.


Next: , Previous: , Up: Linear Algebra   [Contents][Index]