Up: Index Expressions [Contents][Index]
An array with ‘nd’ dimensions can be indexed by a vector idx which has from 1 to ‘nd’ elements. If any element of idx is not a scalar then the complete set of index tuples will be generated from the Cartesian product of the index elements.
For the ordinary and most common case, the number of indices
(nidx = numel (idx)) matches the number of dimensions ‘nd’.
In this case, each element of idx corresponds to its respective dimension,
i.e., idx(1) refers to dimension 1, idx(2) refers to
dimension 2, etc. If nidx < nd, and every index is less than the
size of the array in the i^{th} dimension
(idx(i) < size (array, i)), then the index expression is
padded with nd - nidx trailing singleton dimensions. If
nidx < nd but one of the indices idx(i) is outside the
size of the current array, then the last nd - nidx + 1 dimensions
are folded into a single dimension with an extent equal to the product of
extents of the original dimensions. This is easiest to understand with an
example.
A = reshape (1:8, 2, 2, 2) # Create 3-D array
A =
ans(:,:,1) =
1 3
2 4
ans(:,:,2) =
5 7
6 8
A(2,1,2); # Case (nidx == nd): ans = 6
A(2,1); # Case (nidx < nd), idx within array:
# equivalent to A(2,1,1), ans = 2
A(2,4); # Case (nidx < nd), idx outside array:
# Dimension 2 & 3 folded into new dimension of size 2x2 = 4
# Select 2nd row, 4th element of [2, 4, 6, 8], ans = 8
One advanced use of indexing is to create arrays filled with a single value. This can be done by using an index of ones on a scalar value. The result is an object with the dimensions of the index expression and every element equal to the original scalar. For example, the following statements
a = 13; a(ones (1, 4))
produce a vector whose four elements are all equal to 13.
Similarly, by indexing a scalar with two vectors of ones it is possible to create a matrix. The following statements
a = 13; a(ones (1, 2), ones (1, 3))
create a 2x3 matrix with all elements equal to 13.
The last example could also be written as
13(ones (2, 3))
It is more efficient to use indexing rather than the code construction
scalar * ones (N, M, …) because it avoids the unnecessary
multiplication operation. Moreover, multiplication may not be
defined for the object to be replicated whereas indexing an array is
always defined. The following code shows how to create a 2x3 cell
array from a base unit which is not itself a scalar.
{"Hello"}(ones (2, 3))
It should be, noted that ones (1, n) (a row vector of ones)
results in a range (with zero increment). A range is stored
internally as a starting value, increment, end value, and total number
of values; hence, it is more efficient for storage than a vector or
matrix of ones whenever the number of elements is greater than 4. In
particular, when ‘r’ is a row vector, the expressions
r(ones (1, n), :)
r(ones (n, 1), :)
will produce identical results, but the first one will be significantly faster, at least for ‘r’ and ‘n’ large enough. In the first case the index is held in compressed form as a range which allows Octave to choose a more efficient algorithm to handle the expression.
A general recommendation, for a user unaware of these subtleties, is
to use the function repmat for replicating smaller arrays into
bigger ones.
A second use of indexing is to speed up code. Indexing is a fast operation and judicious use of it can reduce the requirement for looping over individual array elements which is a slow operation.
Consider the following example which creates a 10-element row vector a containing the values a(i) = sqrt (i).
for i = 1:10 a(i) = sqrt (i); endfor
It is quite inefficient to create a vector using a loop like this. In this case, it would have been much more efficient to use the expression
a = sqrt (1:10);
which avoids the loop entirely.
In cases where a loop cannot be avoided, or a number of values must be
combined to form a larger matrix, it is generally faster to set the
size of the matrix first (pre-allocate storage), and then insert
elements using indexing commands. For example, given a matrix
a,
[nr, nc] = size (a); x = zeros (nr, n * nc); for i = 1:n x(:,(i-1)*nc+1:i*nc) = a; endfor
is considerably faster than
x = a; for i = 1:n-1 x = [x, a]; endfor
because Octave does not have to repeatedly resize the intermediate result.
Convert subscripts to linear indices.
The input dims is a dimension vector where each element is the size of the array in the respective dimension (see size). The remaining inputs are scalars or vectors of subscripts to be converted.
The output vector ind contains the converted linear indices.
Background: Array elements can be specified either by a linear index which
starts at 1 and runs through the number of elements in the array, or they may
be specified with subscripts for the row, column, page, etc. The functions
ind2sub and sub2ind interconvert between the two forms.
The linear index traverses dimension 1 (rows), then dimension 2 (columns), then dimension 3 (pages), etc. until it has numbered all of the elements. Consider the following 3-by-3 matrices:
[(1,1), (1,2), (1,3)] [1, 4, 7] [(2,1), (2,2), (2,3)] ==> [2, 5, 8] [(3,1), (3,2), (3,3)] [3, 6, 9]
The left matrix contains the subscript tuples for each matrix element. The right matrix shows the linear indices for the same matrix.
The following example shows how to convert the two-dimensional indices
(2,1) and (2,3) of a 3-by-3 matrix to linear indices with a
single call to sub2ind.
s1 = [2, 2];
s2 = [1, 3];
ind = sub2ind ([3, 3], s1, s2)
⇒ ind = 2 8
Convert linear indices to subscripts.
The input dims is a dimension vector where each element is the size of the array in the respective dimension (see size). The second input ind contains linear indies to be converted.
The outputs s1, …, sN contain the converted subscripts.
Background: Array elements can be specified either by a linear index which
starts at 1 and runs through the number of elements in the array, or they may
be specified with subscripts for the row, column, page, etc. The functions
ind2sub and sub2ind interconvert between the two forms.
The linear index traverses dimension 1 (rows), then dimension 2 (columns), then dimension 3 (pages), etc. until it has numbered all of the elements. Consider the following 3-by-3 matrices:
[1, 4, 7] [(1,1), (1,2), (1,3)] [2, 5, 8] ==> [(2,1), (2,2), (2,3)] [3, 6, 9] [(3,1), (3,2), (3,3)]
The left matrix contains the linear indices for each matrix element. The right matrix shows the subscript tuples for the same matrix.
The following example shows how to convert the two-dimensional indices
(2,1) and (2,3) of a 3-by-3 matrix to linear indices with a
single call to sub2ind.
The following example shows how to convert the linear indices 2 and
8 in a 3-by-3 matrix into subscripts.
ind = [2, 8];
[r, c] = ind2sub ([3, 3], ind)
⇒ r = 2 2
⇒ c = 1 3
If the number of output subscripts exceeds the number of dimensions, the
exceeded dimensions are set to 1. On the other hand, if fewer
subscripts than dimensions are provided, the exceeding dimensions are merged
into the final requested dimension. For clarity, consider the following
examples:
ind = [2, 8];
dims = [3, 3];
## same as dims = [3, 3, 1]
[r, c, s] = ind2sub (dims, ind)
⇒ r = 2 2
⇒ c = 1 3
⇒ s = 1 1
## same as dims = [9]
r = ind2sub (dims, ind)
⇒ r = 2 8
Return true if ind is a valid index.
Valid indices are either positive integers (although possibly of real data type), or logical arrays.
If present, n specifies the maximum extent of the dimension to be indexed. When possible the internal result is cached so that subsequent indexing using ind will not perform the check again.
Implementation Note: Strings are first converted to double values before the checks for valid indices are made. Unless a string contains the NULL character "\0", it will always be a valid index.
Query or set the internal variable that controls whether non-integer ranges are allowed as indices.
This might be useful for MATLAB compatibility; however, it is still not entirely compatible because MATLAB treats the range expression differently in different contexts.
When called from inside a function with the "local" option, the
variable is changed locally for the function and any subroutines it calls.
The original variable value is restored when exiting the function.
Up: Index Expressions [Contents][Index]