d5/d09/ddasrt_8f_source.html

       SUBROUTINE ddasrt (RES,NEQ,T,Y,YPRIME,TOUT,

      *  INFO,RTOL,ATOL,IDID,RWORK,LRW,IWORK,LIW,RPAR,IPAR,JAC,

      *  G,NG,JROOT)

 C

 C***BEGIN PROLOGUE  DDASRT

 C***DATE WRITTEN   821001   (YYMMDD)

 C***REVISION DATE  910624   (YYMMDD)

 C***KEYWORDS  DIFFERENTIAL/ALGEBRAIC,BACKWARD DIFFERENTIATION FORMULAS

 C             IMPLICIT DIFFERENTIAL SYSTEMS

 C***AUTHOR  PETZOLD,LINDA R.,COMPUTING AND MATHEMATICS RESEARCH DIVISION

 C             LAWRENCE LIVERMORE NATIONAL LABORATORY

 C             L - 316, P.O. Box 808,

 C             LIVERMORE, CA.    94550

 C***PURPOSE  This code solves a system of differential/algebraic

 C            equations of the form F(T,Y,YPRIME) = 0.

 C***DESCRIPTION

 C

 C *Usage:

 C

 C      IMPLICIT DOUBLE PRECISION (A-H,O-Z)

 C      EXTERNAL RES, JAC, G

 C      INTEGER NEQ, INFO(N), IDID, LRW, LIW, IWORK(LIW), IPAR, NG,

 C     *   JROOT(NG)

 C      DOUBLE PRECISION T, Y(NEQ), YPRIME(NEQ), TOUT, RTOL, ATOL,

 C     *   RWORK(LRW), RPAR

 C

 C      CALL DDASRT (RES, NEQ, T, Y, YPRIME, TOUT, INFO, RTOL, ATOL,

 C     *   IDID, RWORK, LRW, IWORK, LIW, RPAR, IPAR, JAC)

 C

 C

 C

 C *Arguments:

 C

 C  RES:EXT  This is a subroutine which you provide to define the

 C           differential/algebraic system.

 C

 C  NEQ:IN  This is the number of equations to be solved.

 C

 C  T:INOUT  This is the current value of the independent variable.

 C

 C  Y(*):INOUT  This array contains the solution components at T.

 C

 C  YPRIME(*):INOUT  This array contains the derivatives of the solution

 C                   components at T.

 C

 C  TOUT:IN  This is a point at which a solution is desired.

 C

 C  INFO(N):IN  The basic task of the code is to solve the system from T

 C              to TOUT and return an answer at TOUT.  INFO is an integer

 C              array which is used to communicate exactly how you want

 C              this task to be carried out.  N must be greater than or

 C              equal to 15.

 C

 C  RTOL,ATOL:INOUT  These quantities represent absolute and relative

 C                   error tolerances which you provide to indicate how

 C                   accurately you wish the solution to be computed.

 C                   You may choose them to be both scalars or else

 C                   both vectors.

 C

 C  IDID:OUT  This scalar quantity is an indicator reporting what the

 C            code did.  You must monitor this integer variable to decide

 C            what action to take next.

 C

 C  RWORK:WORK  A real work array of length LRW which provides the

 C               code with needed storage space.

 C

 C  LRW:IN  The length of RWORK.

 C

 C  IWORK:WORK  An integer work array of length LIW which probides the

 C               code with needed storage space.

 C

 C  LIW:IN  The length of IWORK.

 C

 C  RPAR,IPAR:IN  These are real and integer parameter arrays which

 C                you can use for communication between your calling

 C                program and the RES subroutine (and the JAC subroutine)

 C

 C  JAC:EXT  This is the name of a subroutine which you may choose to

 C           provide for defining a matrix of partial derivatives

 C           described below.

 C

 C  G  This is the name of the subroutine for defining

 C     constraint functions, G(T,Y), whose roots are desired

 C     during the integration.  This name must be declared

 C     external in the calling program.

 C

 C  NG  This is the number of constraint functions G(I).

 C      If there are none, set NG=0, and pass a dummy name

 C      for G.

 C

 C  JROOT  This is an integer array of length NG for output

 C         of root information.

 C

 C

 C *Description

 C

 C  QUANTITIES WHICH MAY BE ALTERED BY THE CODE ARE

 C     T,Y(*),YPRIME(*),INFO(1),RTOL,ATOL,

 C     IDID,RWORK(*) AND IWORK(*).

 C

 C  Subroutine DDASRT uses the backward differentiation formulas of

 C  orders one through five to solve a system of the above form for Y and

 C  YPRIME.  Values for Y and YPRIME at the initial time must be given as

 C  input.  These values must be consistent, (that is, if T,Y,YPRIME are

 C  the given initial values, they must satisfy F(T,Y,YPRIME) = 0.).  The

 C  subroutine solves the system from T to TOUT.

 C  It is easy to continue the solution to get results at additional

 C  TOUT.  This is the interval mode of operation.  Intermediate results

 C  can also be obtained easily by using the intermediate-output

 C  capability.  If DDASRT detects a sign-change in G(T,Y), then

 C  it will return the intermediate value of T and Y for which

 C  G(T,Y) = 0.

 C

 C  ---------INPUT-WHAT TO DO ON THE FIRST CALL TO DDASRT---------------

 C

 C

 C  The first call of the code is defined to be the start of each new

 C  problem. Read through the descriptions of all the following items,

 C  provide sufficient storage space for designated arrays, set

 C  appropriate variables for the initialization of the problem, and

 C  give information about how you want the problem to be solved.

 C

 C

 C  RES -- Provide a subroutine of the form

 C             SUBROUTINE RES(T,Y,YPRIME,DELTA,IRES,RPAR,IPAR)

 C         to define the system of differential/algebraic

 C         equations which is to be solved. For the given values

 C         of T,Y and YPRIME, the subroutine should

 C         return the residual of the defferential/algebraic

 C         system

 C             DELTA = F(T,Y,YPRIME)

 C         (DELTA(*) is a vector of length NEQ which is

 C         output for RES.)

 C

 C         Subroutine RES must not alter T,Y or YPRIME.

 C         You must declare the name RES in an external

 C         statement in your program that calls DDASRT.

 C         You must dimension Y,YPRIME and DELTA in RES.

 C

 C         IRES is an integer flag which is always equal to

 C         zero on input. Subroutine RES should alter IRES

 C         only if it encounters an illegal value of Y or

 C         a stop condition. Set IRES = -1 if an input value

 C         is illegal, and DDASRT will try to solve the problem

 C         without getting IRES = -1. If IRES = -2, DDASRT

 C         will return control to the calling program

 C         with IDID = -11.

 C

 C         RPAR and IPAR are real and integer parameter arrays which

 C         you can use for communication between your calling program

 C         and subroutine RES. They are not altered by DDASRT. If you

 C         do not need RPAR or IPAR, ignore these parameters by treat-

 C         ing them as dummy arguments. If you do choose to use them,

 C         dimension them in your calling program and in RES as arrays

 C         of appropriate length.

 C

 C  NEQ -- Set it to the number of differential equations.

 C         (NEQ .GE. 1)

 C

 C  T -- Set it to the initial point of the integration.

 C       T must be defined as a variable.

 C

 C  Y(*) -- Set this vector to the initial values of the NEQ solution

 C          components at the initial point. You must dimension Y of

 C          length at least NEQ in your calling program.

 C

 C  YPRIME(*) -- Set this vector to the initial values of

 C               the NEQ first derivatives of the solution

 C               components at the initial point. You

 C               must dimension YPRIME at least NEQ

 C               in your calling program. If you do not

 C               know initial values of some of the solution

 C               components, see the explanation of INFO(11).

 C

 C  TOUT - Set it to the first point at which a solution

 C         is desired. You can not take TOUT = T.

 C         integration either forward in T (TOUT .GT. T) or

 C         backward in T (TOUT .LT. T) is permitted.

 C

 C         The code advances the solution from T to TOUT using

 C         step sizes which are automatically selected so as to

 C         achieve the desired accuracy. If you wish, the code will

 C         return with the solution and its derivative at

 C         intermediate steps (intermediate-output mode) so that

 C         you can monitor them, but you still must provide TOUT in

 C         accord with the basic aim of the code.

 C

 C         the first step taken by the code is a critical one

 C         because it must reflect how fast the solution changes near

 C         the initial point. The code automatically selects an

 C         initial step size which is practically always suitable for

 C         the problem. By using the fact that the code will not step

 C         past TOUT in the first step, you could, if necessary,

 C         restrict the length of the initial step size.

 C

 C         For some problems it may not be permissable to integrate

 C         past a point TSTOP because a discontinuity occurs there

 C         or the solution or its derivative is not defined beyond

 C         TSTOP. When you have declared a TSTOP point (SEE INFO(4)

 C         and RWORK(1)), you have told the code not to integrate

 C         past TSTOP. In this case any TOUT beyond TSTOP is invalid

 C         input.

 C

 C  INFO(*) - Use the INFO array to give the code more details about

 C            how you want your problem solved. This array should be

 C            dimensioned of length 15, though DDASRT uses

 C            only the first twelve entries. You must respond to all of

 C            the following items which are arranged as questions. The

 C            simplest use of the code corresponds to answering all

 C            questions as yes, i.e. setting all entries of INFO to 0.

 C

 C       INFO(1) - This parameter enables the code to initialize

 C              itself. You must set it to indicate the start of every

 C              new problem.

 C

 C          **** Is this the first call for this problem ...

 C                Yes - Set INFO(1) = 0

 C                 No - Not applicable here.

 C                      See below for continuation calls.  ****

 C

 C       INFO(2) - How much accuracy you want of your solution

 C              is specified by the error tolerances RTOL and ATOL.

 C              The simplest use is to take them both to be scalars.

 C              To obtain more flexibility, they can both be vectors.

 C              The code must be told your choice.

 C

 C          **** Are both error tolerances RTOL, ATOL scalars ...

 C                Yes - Set INFO(2) = 0

 C                      and input scalars for both RTOL and ATOL

 C                 No - Set INFO(2) = 1

 C                      and input arrays for both RTOL and ATOL ****

 C

 C       INFO(3) - The code integrates from T in the direction

 C              of TOUT by steps. If you wish, it will return the

 C              computed solution and derivative at the next

 C              intermediate step (the intermediate-output mode) or

 C              TOUT, whichever comes first. This is a good way to

 C              proceed if you want to see the behavior of the solution.

 C              If you must have solutions at a great many specific

 C              TOUT points, this code will compute them efficiently.

 C

 C          **** Do you want the solution only at

 C                TOUT (and not at the next intermediate step) ...

 C                 Yes - Set INFO(3) = 0

 C                  No - Set INFO(3) = 1 ****

 C

 C       INFO(4) - To handle solutions at a great many specific

 C              values TOUT efficiently, this code may integrate past

 C              TOUT and interpolate to obtain the result at TOUT.

 C              Sometimes it is not possible to integrate beyond some

 C              point TSTOP because the equation changes there or it is

 C              not defined past TSTOP. Then you must tell the code

 C              not to go past.

 C

 C           **** Can the integration be carried out without any

 C                restrictions on the independent variable T ...

 C                 Yes - Set INFO(4)=0

 C                  No - Set INFO(4)=1

 C                       and define the stopping point TSTOP by

 C                       setting RWORK(1)=TSTOP ****

 C

 C       INFO(5) - To solve differential/algebraic problems it is

 C              necessary to use a matrix of partial derivatives of the

 C              system of differential equations. If you do not

 C              provide a subroutine to evaluate it analytically (see

 C              description of the item JAC in the call list), it will

 C              be approximated by numerical differencing in this code.

 C              although it is less trouble for you to have the code

 C              compute partial derivatives by numerical differencing,

 C              the solution will be more reliable if you provide the

 C              derivatives via JAC. Sometimes numerical differencing

 C              is cheaper than evaluating derivatives in JAC and

 C              sometimes it is not - this depends on your problem.

 C

 C           **** Do you want the code to evaluate the partial

 C                derivatives automatically by numerical differences ...

 C                   Yes - Set INFO(5)=0

 C                    No - Set INFO(5)=1

 C                  and provide subroutine JAC for evaluating the

 C                  matrix of partial derivatives ****

 C

 C       INFO(6) - DDASRT will perform much better if the matrix of

 C              partial derivatives, DG/DY + CJ*DG/DYPRIME,

 C              (here CJ is a scalar determined by DDASRT)

 C              is banded and the code is told this. In this

 C              case, the storage needed will be greatly reduced,

 C              numerical differencing will be performed much cheaper,

 C              and a number of important algorithms will execute much

 C              faster. The differential equation is said to have

 C              half-bandwidths ML (lower) and MU (upper) if equation i

 C              involves only unknowns Y(J) with

 C                             I-ML .LE. J .LE. I+MU

 C              for all I=1,2,...,NEQ. Thus, ML and MU are the widths

 C              of the lower and upper parts of the band, respectively,

 C              with the main diagonal being excluded. If you do not

 C              indicate that the equation has a banded matrix of partial

 C              derivatives, the code works with a full matrix of NEQ**2

 C              elements (stored in the conventional way). Computations

 C              with banded matrices cost less time and storage than with

 C              full matrices if 2*ML+MU .LT. NEQ. If you tell the

 C              code that the matrix of partial derivatives has a banded

 C              structure and you want to provide subroutine JAC to

 C              compute the partial derivatives, then you must be careful

 C              to store the elements of the matrix in the special form

 C              indicated in the description of JAC.

 C

 C          **** Do you want to solve the problem using a full

 C               (dense) matrix (and not a special banded

 C               structure) ...

 C                Yes - Set INFO(6)=0

 C                 No - Set INFO(6)=1

 C                       and provide the lower (ML) and upper (MU)

 C                       bandwidths by setting

 C                       IWORK(1)=ML

 C                       IWORK(2)=MU ****

 C

 C

 C        INFO(7) -- You can specify a maximum (absolute value of)

 C              stepsize, so that the code

 C              will avoid passing over very

 C              large regions.

 C

 C          ****  Do you want the code to decide

 C                on its own maximum stepsize?

 C                Yes - Set INFO(7)=0

 C                 No - Set INFO(7)=1

 C                      and define HMAX by setting

 C                      RWORK(2)=HMAX ****

 C

 C        INFO(8) -- Differential/algebraic problems

 C              may occaisionally suffer from

 C              severe scaling difficulties on the

 C              first step. If you know a great deal

 C              about the scaling of your problem, you can

 C              help to alleviate this problem by

 C              specifying an initial stepsize H0.

 C

 C          ****  Do you want the code to define

 C                its own initial stepsize?

 C                Yes - Set INFO(8)=0

 C                 No - Set INFO(8)=1

 C                      and define H0 by setting

 C                      RWORK(3)=H0 ****

 C

 C        INFO(9) -- If storage is a severe problem,

 C              you can save some locations by

 C              restricting the maximum order MAXORD.

 C              the default value is 5. for each

 C              order decrease below 5, the code

 C              requires NEQ fewer locations, however

 C              it is likely to be slower. In any

 C              case, you must have 1 .LE. MAXORD .LE. 5

 C          ****  Do you want the maximum order to

 C                default to 5?

 C                Yes - Set INFO(9)=0

 C                 No - Set INFO(9)=1

 C                      and define MAXORD by setting

 C                      IWORK(3)=MAXORD ****

 C

 C        INFO(10) --If you know that the solutions to your equations

 C               will always be nonnegative, it may help to set this

 C               parameter. However, it is probably best to

 C               try the code without using this option first,

 C               and only to use this option if that doesn't

 C               work very well.

 C           ****  Do you want the code to solve the problem without

 C                 invoking any special nonnegativity constraints?

 C                  Yes - Set INFO(10)=0

 C                   No - Set INFO(10)=1

 C

 C        INFO(11) --DDASRT normally requires the initial T,

 C               Y, and YPRIME to be consistent. That is,

 C               you must have F(T,Y,YPRIME) = 0 at the initial

 C               time. If you do not know the initial

 C               derivative precisely, you can let DDASRT try

 C               to compute it.

 C          ****   Are the initial T, Y, YPRIME consistent?

 C                 Yes - Set INFO(11) = 0

 C                  No - Set INFO(11) = 1,

 C                       and set YPRIME to an initial approximation

 C                       to YPRIME.  (If you have no idea what

 C                       YPRIME should be, set it to zero. Note

 C                       that the initial Y should be such

 C                       that there must exist a YPRIME so that

 C                       F(T,Y,YPRIME) = 0.)

 C

 C        INFO(12) --Maximum number of steps.

 C          ****   Do you want to let DDASRT use the default limit for

 C                 the number of steps?

 C                 Yes - Set INFO(12) = 0

 C                  No - Set INFO(12) = 1,

 C                       and define the maximum number of steps

 C                       by setting IWORK(21)=MXSTEP

 C

 C   RTOL, ATOL -- You must assign relative (RTOL) and absolute (ATOL

 C               error tolerances to tell the code how accurately you

 C               want the solution to be computed. They must be defined

 C               as variables because the code may change them. You

 C               have two choices --

 C                     Both RTOL and ATOL are scalars. (INFO(2)=0)

 C                     Both RTOL and ATOL are vectors. (INFO(2)=1)

 C               in either case all components must be non-negative.

 C

 C               The tolerances are used by the code in a local error

 C               test at each step which requires roughly that

 C                     ABS(LOCAL ERROR) .LE. RTOL*ABS(Y)+ATOL

 C               for each vector component.

 C               (More specifically, a root-mean-square norm is used to

 C               measure the size of vectors, and the error test uses the

 C               magnitude of the solution at the beginning of the step.)

 C

 C               The true (global) error is the difference between the

 C               true solution of the initial value problem and the

 C               computed approximation. Practically all present day

 C               codes, including this one, control the local error at

 C               each step and do not even attempt to control the global

 C               error directly.

 C               Usually, but not always, the true accuracy of the

 C               computed Y is comparable to the error tolerances. This

 C               code will usually, but not always, deliver a more

 C               accurate solution if you reduce the tolerances and

 C               integrate again. By comparing two such solutions you

 C               can get a fairly reliable idea of the true error in the

 C               solution at the bigger tolerances.

 C

 C               Setting ATOL=0. results in a pure relative error test on

 C               that component. Setting RTOL=0. results in a pure

 C               absolute error test on that component. A mixed test

 C               with non-zero RTOL and ATOL corresponds roughly to a

 C               relative error test when the solution component is much

 C               bigger than ATOL and to an absolute error test when the

 C               solution component is smaller than the threshhold ATOL.

 C

 C               The code will not attempt to compute a solution at an

 C               accuracy unreasonable for the machine being used. It

 C               will advise you if you ask for too much accuracy and

 C               inform you as to the maximum accuracy it believes

 C               possible.

 C

 C  RWORK(*) --  Dimension this real work array of length LRW in your

 C               calling program.

 C

 C  LRW -- Set it to the declared length of the RWORK array.

 C               You must have

 C                    LRW .GE. 50+(MAXORD+4)*NEQ+NEQ**2+3*NG

 C               for the full (dense) JACOBIAN case (when INFO(6)=0), or

 C                    LRW .GE. 50+(MAXORD+4)*NEQ+(2*ML+MU+1)*NEQ+3*NG

 C               for the banded user-defined JACOBIAN case

 C               (when INFO(5)=1 and INFO(6)=1), or

 C                     LRW .GE. 50+(MAXORD+4)*NEQ+(2*ML+MU+1)*NEQ

 C                           +2*(NEQ/(ML+MU+1)+1)+3*NG

 C               for the banded finite-difference-generated JACOBIAN case

 C               (when INFO(5)=0 and INFO(6)=1)

 C

 C  IWORK(*) --  Dimension this integer work array of length LIW in

 C               your calling program.

 C

 C  LIW -- Set it to the declared length of the IWORK array.

 C               you must have LIW .GE. 21+NEQ

 C

 C  RPAR, IPAR -- These are parameter arrays, of real and integer

 C               type, respectively. You can use them for communication

 C               between your program that calls DDASRT and the

 C               RES subroutine (and the JAC subroutine). They are not

 C               altered by DDASRT. If you do not need RPAR or IPAR,

 C               ignore these parameters by treating them as dummy

 C               arguments. If you do choose to use them, dimension

 C               them in your calling program and in RES (and in JAC)

 C               as arrays of appropriate length.

 C

 C  JAC -- If you have set INFO(5)=0, you can ignore this parameter

 C               by treating it as a dummy argument. Otherwise, you must

 C               provide a subroutine of the form

 C               JAC(T,Y,YPRIME,PD,CJ,RPAR,IPAR)

 C               to define the matrix of partial derivatives

 C               PD=DG/DY+CJ*DG/DYPRIME

 C               CJ is a scalar which is input to JAC.

 C               For the given values of T,Y,YPRIME, the

 C               subroutine must evaluate the non-zero partial

 C               derivatives for each equation and each solution

 C               component, and store these values in the

 C               matrix PD. The elements of PD are set to zero

 C               before each call to JAC so only non-zero elements

 C               need to be defined.

 C

 C               Subroutine JAC must not alter T,Y,(*),YPRIME(*), or CJ.

 C               You must declare the name JAC in an

 C               EXTERNAL STATEMENT in your program that calls

 C               DDASRT. You must dimension Y, YPRIME and PD

 C               in JAC.

 C

 C               The way you must store the elements into the PD matrix

 C               depends on the structure of the matrix which you

 C               indicated by INFO(6).

 C               *** INFO(6)=0 -- Full (dense) matrix ***

 C                   Give PD a first dimension of NEQ.

 C                   When you evaluate the (non-zero) partial derivative

 C                   of equation I with respect to variable J, you must

 C                   store it in PD according to

 C                   PD(I,J) = * DF(I)/DY(J)+CJ*DF(I)/DYPRIME(J)*

 C               *** INFO(6)=1 -- Banded JACOBIAN with ML lower and MU

 C                   upper diagonal bands (refer to INFO(6) description

 C                   of ML and MU) ***

 C                   Give PD a first dimension of 2*ML+MU+1.

 C                   when you evaluate the (non-zero) partial derivative

 C                   of equation I with respect to variable J, you must

 C                   store it in PD according to

 C                   IROW = I - J + ML + MU + 1

 C                   PD(IROW,J) = *DF(I)/DY(J)+CJ*DF(I)/DYPRIME(J)*

 C               RPAR and IPAR are real and integer parameter arrays

 C               which you can use for communication between your calling

 C               program and your JACOBIAN subroutine JAC. They are not

 C               altered by DDASRT. If you do not need RPAR or IPAR,

 C               ignore these parameters by treating them as dummy

 C               arguments. If you do choose to use them, dimension

 C               them in your calling program and in JAC as arrays of

 C               appropriate length.

 C

 C  G -- This is the name of the subroutine for defining constraint

 C               functions, whose roots are desired during the

 C               integration.  It is to have the form

 C                   SUBROUTINE G(NEQ,T,Y,NG,GOUT,RPAR,IPAR)

 C                   DIMENSION Y(NEQ),GOUT(NG),

 C               where NEQ, T, Y and NG are INPUT, and the array GOUT is

 C               output.  NEQ, T, and Y have the same meaning as in the

 C               RES routine, and GOUT is an array of length NG.

 C               For I=1,...,NG, this routine is to load into GOUT(I)

 C               the value at (T,Y) of the I-th constraint function G(I).

 C               DDASRT will find roots of the G(I) of odd multiplicity

 C               (that is, sign changes) as they occur during

 C               the integration.  G must be declared EXTERNAL in the

 C               calling program.

 C

 C               CAUTION..because of numerical errors in the functions

 C               G(I) due to roundoff and integration error, DDASRT

 C               may return false roots, or return the same root at two

 C               or more nearly equal values of T.  If such false roots

 C               are suspected, the user should consider smaller error

 C               tolerances and/or higher precision in the evaluation of

 C               the G(I).

 C

 C               If a root of some G(I) defines the end of the problem,

 C               the input to DDASRT should nevertheless allow

 C               integration to a point slightly past that ROOT, so

 C               that DDASRT can locate the root by interpolation.

 C

 C  NG -- The number of constraint functions G(I).  If there are none,

 C               set NG = 0, and pass a dummy name for G.

 C

 C JROOT -- This is an integer array of length NG.  It is used only for

 C               output.  On a return where one or more roots have been

 C               found, JROOT(I)=1 If G(I) has a root at T,

 C               or JROOT(I)=0 if not.

 C

 C

 C

 C  OPTIONALLY REPLACEABLE NORM ROUTINE:

 C  DDASRT uses a weighted norm DDANRM to measure the size

 C  of vectors such as the estimated error in each step.

 C  A FUNCTION subprogram

 C    DOUBLE PRECISION FUNCTION DDANRM(NEQ,V,WT,RPAR,IPAR)

 C    DIMENSION V(NEQ),WT(NEQ)

 C  is used to define this norm. Here, V is the vector

 C  whose norm is to be computed, and WT is a vector of

 C  weights.  A DDANRM routine has been included with DDASRT

 C  which computes the weighted root-mean-square norm

 C  given by

 C    DDANRM=SQRT((1/NEQ)*SUM(V(I)/WT(I))**2)

 C  this norm is suitable for most problems. In some

 C  special cases, it may be more convenient and/or

 C  efficient to define your own norm by writing a function

 C  subprogram to be called instead of DDANRM. This should

 C  ,however, be attempted only after careful thought and

 C  consideration.

 C

 C

 C------OUTPUT-AFTER ANY RETURN FROM DDASRT----

 C

 C  The principal aim of the code is to return a computed solution at

 C  TOUT, although it is also possible to obtain intermediate results

 C  along the way. To find out whether the code achieved its goal

 C  or if the integration process was interrupted before the task was

 C  completed, you must check the IDID parameter.

 C

 C

 C   T -- The solution was successfully advanced to the

 C               output value of T.

 C

 C   Y(*) -- Contains the computed solution approximation at T.

 C

 C   YPRIME(*) -- Contains the computed derivative

 C               approximation at T.

 C

 C   IDID -- Reports what the code did.

 C

 C                     *** Task completed ***

 C                Reported by positive values of IDID

 C

 C           IDID = 1 -- A step was successfully taken in the

 C                   intermediate-output mode. The code has not

 C                   yet reached TOUT.

 C

 C           IDID = 2 -- The integration to TSTOP was successfully

 C                   completed (T=TSTOP) by stepping exactly to TSTOP.

 C

 C           IDID = 3 -- The integration to TOUT was successfully

 C                   completed (T=TOUT) by stepping past TOUT.

 C                   Y(*) is obtained by interpolation.

 C                   YPRIME(*) is obtained by interpolation.

 C

 C           IDID = 4 -- The integration was successfully completed

 C                   by finding one or more roots of G at T.

 C

 C                    *** Task interrupted ***

 C                Reported by negative values of IDID

 C

 C           IDID = -1 -- A large amount of work has been expended.

 C                   (About INFO(12) steps)

 C

 C           IDID = -2 -- The error tolerances are too stringent.

 C

 C           IDID = -3 -- The local error test cannot be satisfied

 C                   because you specified a zero component in ATOL

 C                   and the corresponding computed solution

 C                   component is zero. Thus, a pure relative error

 C                   test is impossible for this component.

 C

 C           IDID = -6 -- DDASRT had repeated error test

 C                   failures on the last attempted step.

 C

 C           IDID = -7 -- The corrector could not converge.

 C

 C           IDID = -8 -- The matrix of partial derivatives

 C                   is singular.

 C

 C           IDID = -9 -- The corrector could not converge.

 C                   there were repeated error test failures

 C                   in this step.

 C

 C           IDID =-10 -- The corrector could not converge

 C                   because IRES was equal to minus one.

 C

 C           IDID =-11 -- IRES equal to -2 was encountered

 C                   and control is being returned to the

 C                   calling program.

 C

 C           IDID =-12 -- DDASRT failed to compute the initial

 C                   YPRIME.

 C

 C

 C

 C           IDID = -13,..,-32 -- Not applicable for this code

 C

 C                    *** Task terminated ***

 C                Reported by the value of IDID=-33

 C

 C           IDID = -33 -- The code has encountered trouble from which

 C                   it cannot recover. A message is printed

 C                   explaining the trouble and control is returned

 C                   to the calling program. For example, this occurs

 C                   when invalid input is detected.

 C

 C   RTOL, ATOL -- These quantities remain unchanged except when

 C               IDID = -2. In this case, the error tolerances have been

 C               increased by the code to values which are estimated to

 C               be appropriate for continuing the integration. However,

 C               the reported solution at T was obtained using the input

 C               values of RTOL and ATOL.

 C

 C   RWORK, IWORK -- Contain information which is usually of no

 C               interest to the user but necessary for subsequent calls.

 C               However, you may find use for

 C

 C               RWORK(3)--Which contains the step size H to be

 C                       attempted on the next step.

 C

 C               RWORK(4)--Which contains the current value of the

 C                       independent variable, i.e., the farthest point

 C                       integration has reached. This will be different

 C                       from T only when interpolation has been

 C                       performed (IDID=3).

 C

 C               RWORK(7)--Which contains the stepsize used

 C                       on the last successful step.

 C

 C               IWORK(7)--Which contains the order of the method to

 C                       be attempted on the next step.

 C

 C               IWORK(8)--Which contains the order of the method used

 C                       on the last step.

 C

 C               IWORK(11)--Which contains the number of steps taken so

 C                        far.

 C

 C               IWORK(12)--Which contains the number of calls to RES

 C                        so far.

 C

 C               IWORK(13)--Which contains the number of evaluations of

 C                        the matrix of partial derivatives needed so

 C                        far.

 C

 C               IWORK(14)--Which contains the total number

 C                        of error test failures so far.

 C

 C               IWORK(15)--Which contains the total number

 C                        of convergence test failures so far.

 C                        (includes singular iteration matrix

 C                        failures.)

 C

 C               IWORK(16)--Which contains the total number of calls

 C                        to the constraint function g so far

 C

 C

 C

 C   INPUT -- What to do to continue the integration

 C            (calls after the first)                **

 C

 C     This code is organized so that subsequent calls to continue the

 C     integration involve little (if any) additional effort on your

 C     part. You must monitor the IDID parameter in order to determine

 C     what to do next.

 C

 C     Recalling that the principal task of the code is to integrate

 C     from T to TOUT (the interval mode), usually all you will need

 C     to do is specify a new TOUT upon reaching the current TOUT.

 C

 C     Do not alter any quantity not specifically permitted below,

 C     in particular do not alter NEQ,T,Y(*),YPRIME(*),RWORK(*),IWORK(*)

 C     or the differential equation in subroutine RES. Any such

 C     alteration constitutes a new problem and must be treated as such,

 C     i.e., you must start afresh.

 C

 C     You cannot change from vector to scalar error control or vice

 C     versa (INFO(2)), but you can change the size of the entries of

 C     RTOL, ATOL. Increasing a tolerance makes the equation easier

 C     to integrate. Decreasing a tolerance will make the equation

 C     harder to integrate and should generally be avoided.

 C

 C     You can switch from the intermediate-output mode to the

 C     interval mode (INFO(3)) or vice versa at any time.

 C

 C     If it has been necessary to prevent the integration from going

 C     past a point TSTOP (INFO(4), RWORK(1)), keep in mind that the

 C     code will not integrate to any TOUT beyond the currently

 C     specified TSTOP. Once TSTOP has been reached you must change

 C     the value of TSTOP or set INFO(4)=0. You may change INFO(4)

 C     or TSTOP at any time but you must supply the value of TSTOP in

 C     RWORK(1) whenever you set INFO(4)=1.

 C

 C     Do not change INFO(5), INFO(6), IWORK(1), or IWORK(2)

 C     unless you are going to restart the code.

 C

 C                    *** Following a completed task ***

 C     If

 C     IDID = 1, call the code again to continue the integration

 C                  another step in the direction of TOUT.

 C

 C     IDID = 2 or 3, define a new TOUT and call the code again.

 C                  TOUT must be different from T. You cannot change

 C                  the direction of integration without restarting.

 C

 C     IDID = 4, call the code again to continue the integration

 C                  another step in the direction of TOUT.  You may

 C                  change the functions in G after a return with IDID=4,

 C                  but the number of constraint functions NG must remain

 C                  the same.  If you wish to change

 C                  the functions in RES or in G, then you

 C                  must restart the code.

 C

 C                    *** Following an interrupted task ***

 C                  To show the code that you realize the task was

 C                  interrupted and that you want to continue, you

 C                  must take appropriate action and set INFO(1) = 1

 C     If

 C     IDID = -1, The code has reached the step iteration.

 C                  If you want to continue, set INFO(1) = 1 and

 C                  call the code again.  See also INFO(12).

 C

 C     IDID = -2, The error tolerances RTOL, ATOL have been

 C                  increased to values the code estimates appropriate

 C                  for continuing. You may want to change them

 C                  yourself. If you are sure you want to continue

 C                  with relaxed error tolerances, set INFO(1)=1 and

 C                  call the code again.

 C

 C     IDID = -3, A solution component is zero and you set the

 C                  corresponding component of ATOL to zero. If you

 C                  are sure you want to continue, you must first

 C                  alter the error criterion to use positive values

 C                  for those components of ATOL corresponding to zero

 C                  solution components, then set INFO(1)=1 and call

 C                  the code again.

 C

 C     IDID = -4,-5  --- Cannot occur with this code.

 C

 C     IDID = -6, Repeated error test failures occurred on the

 C                  last attempted step in DDASRT. A singularity in the

 C                  solution may be present. If you are absolutely

 C                  certain you want to continue, you should restart

 C                  the integration. (Provide initial values of Y and

 C                  YPRIME which are consistent)

 C

 C     IDID = -7, Repeated convergence test failures occurred

 C                  on the last attempted step in DDASRT. An inaccurate

 C                  or ill-conditioned JACOBIAN may be the problem. If

 C                  you are absolutely certain you want to continue, you

 C                  should restart the integration.

 C

 C     IDID = -8, The matrix of partial derivatives is singular.

 C                  Some of your equations may be redundant.

 C                  DDASRT cannot solve the problem as stated.

 C                  It is possible that the redundant equations

 C                  could be removed, and then DDASRT could

 C                  solve the problem. It is also possible

 C                  that a solution to your problem either

 C                  does not exist or is not unique.

 C

 C     IDID = -9, DDASRT had multiple convergence test

 C                  failures, preceeded by multiple error

 C                  test failures, on the last attempted step.

 C                  It is possible that your problem

 C                  is ill-posed, and cannot be solved

 C                  using this code. Or, there may be a

 C                  discontinuity or a singularity in the

 C                  solution. If you are absolutely certain

 C                  you want to continue, you should restart

 C                  the integration.

 C

 C    IDID =-10, DDASRT had multiple convergence test failures

 C                  because IRES was equal to minus one.

 C                  If you are absolutely certain you want

 C                  to continue, you should restart the

 C                  integration.

 C

 C    IDID =-11, IRES=-2 was encountered, and control is being

 C                  returned to the calling program.

 C

 C    IDID =-12, DDASRT failed to compute the initial YPRIME.

 C               This could happen because the initial

 C               approximation to YPRIME was not very good, or

 C               if a YPRIME consistent with the initial Y

 C               does not exist. The problem could also be caused

 C               by an inaccurate or singular iteration matrix.

 C

 C

 C

 C     IDID = -13,..,-32 --- Cannot occur with this code.

 C

 C                       *** Following a terminated task ***

 C     If IDID= -33, you cannot continue the solution of this

 C                  problem. An attempt to do so will result in your

 C                  run being terminated.

 C

 C  ---------------------------------------------------------------------

 C

 C***REFERENCE

 C      K. E. Brenan, S. L. Campbell, and L. R. Petzold, Numerical

 C      Solution of Initial-Value Problems in Differential-Algebraic

 C      Equations, Elsevier, New York, 1989.

 C

 C***ROUTINES CALLED  DDASTP,DDAINI,DDANRM,DDAWTS,DDATRP,DRCHEK,DROOTS,

 C                    XERRWD,D1MACH

 C***END PROLOGUE  DDASRT

 C

 C**End

 C

       IMPLICIT DOUBLE PRECISION(a-h,o-z)

       LOGICAL DONE

       EXTERNAL res, jac, g

       dimension y(*),yprime(*)

       dimension info(15)

       dimension rwork(*),iwork(*)

       dimension rtol(*),atol(*)

       dimension rpar(*),ipar(*)

       CHARACTER MSG*80

 C

 C     SET POINTERS INTO IWORK

       parameter(lml=1, lmu=2, lmxord=3, lmtype=4, lnst=11,

      *  lnre=12, lnje=13, letf=14, lctf=15, lnge=16, lnpd=17,

      *  lirfnd=18, lmxstp=21, lipvt=22, ljcalc=5, lphase=6, lk=7,

      *  lkold=8, lns=9, lnstl=10, liwm=1)

 C

 C     SET RELATIVE OFFSET INTO RWORK

       parameter(npd=1)

 C

 C     SET POINTERS INTO RWORK

       parameter(ltstop=1, lhmax=2, lh=3, ltn=4,

      *  lcj=5, lcjold=6, lhold=7, ls=8, lround=9,

      *  lalpha=11, lbeta=17, lgamma=23,

      *  lpsi=29, lsigma=35, lt0=41, ltlast=42, lalphr=43, lx2=44,

      *  ldelta=51)

 C

 C***FIRST EXECUTABLE STATEMENT  DDASRT

       IF(info(1).NE.0)GO TO 100

 C

 C-----------------------------------------------------------------------

 C     THIS BLOCK IS EXECUTED FOR THE INITIAL CALL ONLY.

 C     IT CONTAINS CHECKING OF INPUTS AND INITIALIZATIONS.

 C-----------------------------------------------------------------------

 C

 C     FIRST CHECK INFO ARRAY TO MAKE SURE ALL ELEMENTS OF INFO

 C     ARE EITHER ZERO OR ONE.

       DO 10 i=2,12

          IF(info(i).NE.0.AND.info(i).NE.1)GO TO 701

 10       CONTINUE

 C

       IF(neq.LE.0)GO TO 702

 C

 C     CHECK AND COMPUTE MAXIMUM ORDER

       mxord=5

       IF(info(9).EQ.0)GO TO 20

          mxord=iwork(lmxord)

          IF(mxord.LT.1.OR.mxord.GT.5)GO TO 703

 20       iwork(lmxord)=mxord

 C

 C     COMPUTE MTYPE,LENPD,LENRW.CHECK ML AND MU.

       IF(info(6).NE.0)GO TO 40

          lenpd=neq**2

          lenrw=50+(iwork(lmxord)+4)*neq+lenpd+3*ng

          IF(info(5).NE.0)GO TO 30

             iwork(lmtype)=2

             GO TO 60

 30          iwork(lmtype)=1

             GO TO 60

 40    IF(iwork(lml).LT.0.OR.iwork(lml).GE.neq)GO TO 717

       IF(iwork(lmu).LT.0.OR.iwork(lmu).GE.neq)GO TO 718

       lenpd=(2*iwork(lml)+iwork(lmu)+1)*neq

       IF(info(5).NE.0)GO TO 50

          iwork(lmtype)=5

          mband=iwork(lml)+iwork(lmu)+1

          msave=(neq/mband)+1

          lenrw=50+(iwork(lmxord)+4)*neq+lenpd+2*msave+3*ng

          GO TO 60

 50       iwork(lmtype)=4

          lenrw=50+(iwork(lmxord)+4)*neq+lenpd+3*ng

 C

 C     CHECK LENGTHS OF RWORK AND IWORK

 60    leniw=21+neq

       iwork(lnpd)=lenpd

       IF(lrw.LT.lenrw)GO TO 704

       IF(liw.LT.leniw)GO TO 705

 C

 C     CHECK TO SEE THAT TOUT IS DIFFERENT FROM T

 C     Also check to see that NG is larger than 0.

       IF(tout .EQ. t)GO TO 719

       IF(ng .LT. 0) GO TO 730

 C

 C     CHECK HMAX

       IF(info(7).EQ.0)GO TO 70

          hmax=rwork(lhmax)

          IF(hmax.LE.0.0d0)GO TO 710

 70    CONTINUE

 C

 C     CHECK AND COMPUTE MAXIMUM STEPS

       mxstp=500

       IF(info(12).EQ.0)GO TO 80

         mxstp=iwork(lmxstp)

         IF(mxstp.LT.0)GO TO 716

 80      iwork(lmxstp)=mxstp

 C

 C     INITIALIZE COUNTERS

       iwork(lnst)=0

       iwork(lnre)=0

       iwork(lnje)=0

       iwork(lnge)=0

 C

       iwork(lnstl)=0

       idid=1

       GO TO 200

 C

 C-----------------------------------------------------------------------

 C     THIS BLOCK IS FOR CONTINUATION CALLS

 C     ONLY. HERE WE CHECK INFO(1),AND IF THE

 C     LAST STEP WAS INTERRUPTED WE CHECK WHETHER

 C     APPROPRIATE ACTION WAS TAKEN.

 C-----------------------------------------------------------------------

 C

 100   CONTINUE

       IF(info(1).EQ.1)GO TO 110

       IF(info(1).NE.-1)GO TO 701

 C     IF WE ARE HERE, THE LAST STEP WAS INTERRUPTED

 C     BY AN ERROR CONDITION FROM DDASTP,AND

 C     APPROPRIATE ACTION WAS NOT TAKEN. THIS

 C     IS A FATAL ERROR.

       msg = 'DASRT--  THE LAST STEP TERMINATED WITH A NEGATIVE'

       CALL xerrwd(msg,49,201,0,0,0,0,0,0.0d0,0.0d0)

       msg = 'DASRT--  VALUE (=I1) OF IDID AND NO APPROPRIATE'

       CALL xerrwd(msg,47,202,0,1,idid,0,0,0.0d0,0.0d0)

       msg = 'DASRT--  ACTION WAS TAKEN. RUN TERMINATED'

       CALL xerrwd(msg,41,203,1,0,0,0,0,0.0d0,0.0d0)

       RETURN

 110   CONTINUE

       iwork(lnstl)=iwork(lnst)

 C

 C-----------------------------------------------------------------------

 C     THIS BLOCK IS EXECUTED ON ALL CALLS.

 C     THE ERROR TOLERANCE PARAMETERS ARE

 C     CHECKED, AND THE WORK ARRAY POINTERS

 C     ARE SET.

 C-----------------------------------------------------------------------

 C

 200   CONTINUE

 C     CHECK RTOL,ATOL

       nzflg=0

       rtoli=rtol(1)

       atoli=atol(1)

       DO 210 i=1,neq

          IF(info(2).EQ.1)rtoli=rtol(i)

          IF(info(2).EQ.1)atoli=atol(i)

          IF(rtoli.GT.0.0d0.OR.atoli.GT.0.0d0)nzflg=1

          IF(rtoli.LT.0.0d0)GO TO 706

          IF(atoli.LT.0.0d0)GO TO 707

 210      CONTINUE

       IF(nzflg.EQ.0)GO TO 708

 C

 C     SET UP RWORK STORAGE.IWORK STORAGE IS FIXED

 C     IN DATA STATEMENT.

       lg0=ldelta+neq

       lg1=lg0+ng

       lgx=lg1+ng

       le=lgx+ng

       lwt=le+neq

       lphi=lwt+neq

       lpd=lphi+(iwork(lmxord)+1)*neq

       lwm=lpd

       ntemp=npd+iwork(lnpd)

       IF(info(1).EQ.1)GO TO 400

 C

 C-----------------------------------------------------------------------

 C     THIS BLOCK IS EXECUTED ON THE INITIAL CALL

 C     ONLY. SET THE INITIAL STEP SIZE, AND

 C     THE ERROR WEIGHT VECTOR, AND PHI.

 C     COMPUTE INITIAL YPRIME, IF NECESSARY.

 C-----------------------------------------------------------------------

 C

 300   CONTINUE

       tn=t

       idid=1

 C

 C     SET ERROR WEIGHT VECTOR WT

       CALL ddawts(neq,info(2),rtol,atol,y,rwork(lwt),rpar,ipar)

       DO 305 i = 1,neq

          IF(rwork(lwt+i-1).LE.0.0d0) GO TO 713

 305      CONTINUE

 C

 C     COMPUTE UNIT ROUNDOFF AND HMIN

       uround = d1mach(4)

       rwork(lround) = uround

       hmin = 4.0d0*uround*dmax1(dabs(t),dabs(tout))

 C

 C     CHECK INITIAL INTERVAL TO SEE THAT IT IS LONG ENOUGH

       tdist = dabs(tout - t)

       IF(tdist .LT. hmin) GO TO 714

 C

 C     CHECK H0, IF THIS WAS INPUT

       IF (info(8) .EQ. 0) GO TO 310

          ho = rwork(lh)

          IF ((tout - t)*ho .LT. 0.0d0) GO TO 711

          IF (ho .EQ. 0.0d0) GO TO 712

          GO TO 320

 310    CONTINUE

 C

 C     COMPUTE INITIAL STEPSIZE, TO BE USED BY EITHER

 C     DDASTP OR DDAINI, DEPENDING ON INFO(11)

       ho = 0.001d0*tdist

       ypnorm = ddanrm(neq,yprime,rwork(lwt),rpar,ipar)

       IF (ypnorm .GT. 0.5d0/ho) ho = 0.5d0/ypnorm

       ho = dsign(ho,tout-t)

 C     ADJUST HO IF NECESSARY TO MEET HMAX BOUND

 320   IF (info(7) .EQ. 0) GO TO 330

          rh = dabs(ho)/rwork(lhmax)

          IF (rh .GT. 1.0d0) ho = ho/rh

 C     COMPUTE TSTOP, IF APPLICABLE

 330   IF (info(4) .EQ. 0) GO TO 340

          tstop = rwork(ltstop)

          IF ((tstop - t)*ho .LT. 0.0d0) GO TO 715

          IF ((t + ho - tstop)*ho .GT. 0.0d0) ho = tstop - t

          IF ((tstop - tout)*ho .LT. 0.0d0) GO TO 709

 C

 C     COMPUTE INITIAL DERIVATIVE, UPDATING TN AND Y, IF APPLICABLE

 340   IF (info(11) .EQ. 0) GO TO 350

       CALL ddaini(tn,y,yprime,neq,

      *  res,jac,ho,rwork(lwt),idid,rpar,ipar,

      *  rwork(lphi),rwork(ldelta),rwork(le),

      *  rwork(lwm),iwork(liwm),hmin,rwork(lround),

      *  info(10),ntemp)

       IF (idid .LT. 0) GO TO 390

 C

 C     LOAD H WITH H0.  STORE H IN RWORK(LH)

 350   h = ho

       rwork(lh) = h

 C

 C     LOAD Y AND H*YPRIME INTO PHI(*,1) AND PHI(*,2)

 360   itemp = lphi + neq

       DO 370 i = 1,neq

          rwork(lphi + i - 1) = y(i)

 370      rwork(itemp + i - 1) = h*yprime(i)

 C

 C     INITIALIZE T0 IN RWORK AND CHECK FOR A ZERO OF G NEAR THE

 C     INITIAL T.

 C

       rwork(lt0) = t

       iwork(lirfnd) = 0

       rwork(lpsi)=h

       rwork(lpsi+1)=2.0d0*h

       iwork(lkold)=1

       IF(ng .EQ. 0) GO TO 390

       CALL drchek(1,g,ng,neq,t,tout,y,rwork(le),rwork(lphi),

      *  rwork(lpsi),iwork(lkold),rwork(lg0),rwork(lg1),

      *  rwork(lgx),jroot,irt,rwork(lround),info(3),

      *  rwork,iwork,rpar,ipar)

       IF(irt .NE. 0) GO TO 732

 C

 C     Check for a root in the interval (T0,TN], unless DDASRT

 C     did not have to initialize YPRIME.

 C

       IF(ng .EQ. 0 .OR. info(11) .EQ. 0) GO TO 390

       CALL drchek(3,g,ng,neq,tn,tout,y,rwork(le),rwork(lphi),

      *  rwork(lpsi),iwork(lkold),rwork(lg0),rwork(lg1),

      *  rwork(lgx),jroot,irt,rwork(lround),info(3),

      *  rwork,iwork,rpar,ipar)

       IF(irt .NE. 1) GO TO 390

       iwork(lirfnd) = 1

       idid = 4

       t = rwork(lt0)

       GO TO 580

 C

 390   GO TO 500

 C

 C-------------------------------------------------------

 C     THIS BLOCK IS FOR CONTINUATION CALLS ONLY. ITS

 C     PURPOSE IS TO CHECK STOP CONDITIONS BEFORE

 C     TAKING A STEP.

 C     ADJUST H IF NECESSARY TO MEET HMAX BOUND

 C-------------------------------------------------------

 C

 400   CONTINUE

       uround=rwork(lround)

       done = .false.

       tn=rwork(ltn)

       h=rwork(lh)

       IF(ng .EQ. 0) GO TO 405

 C

 C     Check for a zero of G near TN.

 C

       CALL drchek(2,g,ng,neq,tn,tout,y,rwork(le),rwork(lphi),

      *  rwork(lpsi),iwork(lkold),rwork(lg0),rwork(lg1),

      *  rwork(lgx),jroot,irt,rwork(lround),info(3),

      *  rwork,iwork,rpar,ipar)

       IF(irt .NE. 1) GO TO 405

       iwork(lirfnd) = 1

       idid = 4

       t = rwork(lt0)

       done = .true.

       GO TO 490

 C

 405   CONTINUE

       IF(info(7) .EQ. 0) GO TO 410

          rh = dabs(h)/rwork(lhmax)

          IF(rh .GT. 1.0d0) h = h/rh

 410   CONTINUE

       IF(t .EQ. tout) GO TO 719

       IF((t - tout)*h .GT. 0.0d0) GO TO 711

       IF(info(4) .EQ. 1) GO TO 430

       IF(info(3) .EQ. 1) GO TO 420

       IF((tn-tout)*h.LT.0.0d0)GO TO 490

       CALL ddatrp(tn,tout,y,yprime,neq,iwork(lkold),

      *  rwork(lphi),rwork(lpsi))

       t=tout

       idid = 3

       done = .true.

       GO TO 490

 420   IF((tn-t)*h .LE. 0.0d0) GO TO 490

       IF((tn - tout)*h .GT. 0.0d0) GO TO 425

       CALL ddatrp(tn,tn,y,yprime,neq,iwork(lkold),

      *  rwork(lphi),rwork(lpsi))

       t = tn

       idid = 1

       done = .true.

       GO TO 490

 425   CONTINUE

       CALL ddatrp(tn,tout,y,yprime,neq,iwork(lkold),

      *  rwork(lphi),rwork(lpsi))

       t = tout

       idid = 3

       done = .true.

       GO TO 490

 430   IF(info(3) .EQ. 1) GO TO 440

       tstop=rwork(ltstop)

       IF((tn-tstop)*h.GT.0.0d0) GO TO 715

       IF((tstop-tout)*h.LT.0.0d0)GO TO 709

       IF((tn-tout)*h.LT.0.0d0)GO TO 450

       CALL ddatrp(tn,tout,y,yprime,neq,iwork(lkold),

      *   rwork(lphi),rwork(lpsi))

       t=tout

       idid = 3

       done = .true.

       GO TO 490

 440   tstop = rwork(ltstop)

       IF((tn-tstop)*h .GT. 0.0d0) GO TO 715

       IF((tstop-tout)*h .LT. 0.0d0) GO TO 709

       IF((tn-t)*h .LE. 0.0d0) GO TO 450

       IF((tn - tout)*h .GT. 0.0d0) GO TO 445

       CALL ddatrp(tn,tn,y,yprime,neq,iwork(lkold),

      *  rwork(lphi),rwork(lpsi))

       t = tn

       idid = 1

       done = .true.

       GO TO 490

 445   CONTINUE

       CALL ddatrp(tn,tout,y,yprime,neq,iwork(lkold),

      *  rwork(lphi),rwork(lpsi))

       t = tout

       idid = 3

       done = .true.

       GO TO 490

 450   CONTINUE

 C     CHECK WHETHER WE ARE WITH IN ROUNDOFF OF TSTOP

       IF(dabs(tn-tstop).GT.100.0d0*uround*

      *   (dabs(tn)+dabs(h)))GO TO 460

       CALL ddatrp(tn,tstop,y,yprime,neq,iwork(lkold),

      *  rwork(lphi),rwork(lpsi))

       idid=2

       t=tstop

       done = .true.

       GO TO 490

 460   tnext=tn+h

       IF((tnext-tstop)*h.LE.0.0d0)GO TO 490

       h=tstop-tn

       rwork(lh)=h

 C

 490   IF (done) GO TO 590

 C

 C-------------------------------------------------------

 C     THE NEXT BLOCK CONTAINS THE CALL TO THE

 C     ONE-STEP INTEGRATOR DDASTP.

 C     THIS IS A LOOPING POINT FOR THE INTEGRATION STEPS.

 C     CHECK FOR TOO MANY STEPS.

 C     UPDATE WT.

 C     CHECK FOR TOO MUCH ACCURACY REQUESTED.

 C     COMPUTE MINIMUM STEPSIZE.

 C-------------------------------------------------------

 C

 500   CONTINUE

 C     CHECK FOR FAILURE TO COMPUTE INITIAL YPRIME

       IF (idid .EQ. -12) GO TO 527

 C

 C     CHECK FOR TOO MANY STEPS

       IF((iwork(lnst)-iwork(lnstl)).LT.iwork(lmxstp))

      *   GO TO 510

            idid=-1

            GO TO 527

 C

 C     UPDATE WT

 510   CALL ddawts(neq,info(2),rtol,atol,rwork(lphi),

      *  rwork(lwt),rpar,ipar)

       DO 520 i=1,neq

          IF(rwork(i+lwt-1).GT.0.0d0)GO TO 520

            idid=-3

            GO TO 527

 520   CONTINUE

 C

 C     TEST FOR TOO MUCH ACCURACY REQUESTED.

       r=ddanrm(neq,rwork(lphi),rwork(lwt),rpar,ipar)*

      *   100.0d0*uround

       IF(r.LE.1.0d0)GO TO 525

 C     MULTIPLY RTOL AND ATOL BY R AND RETURN

       IF(info(2).EQ.1)GO TO 523

            rtol(1)=r*rtol(1)

            atol(1)=r*atol(1)

            idid=-2

            GO TO 527

 523   DO 524 i=1,neq

            rtol(i)=r*rtol(i)

 524        atol(i)=r*atol(i)

       idid=-2

       GO TO 527

 525   CONTINUE

 C

 C     COMPUTE MINIMUM STEPSIZE

       hmin=4.0d0*uround*dmax1(dabs(tn),dabs(tout))

 C

 C     TEST H VS. HMAX

       IF (info(7) .EQ. 0) GO TO 526

          rh = abs(h)/rwork(lhmax)

          IF (rh .GT. 1.0d0) h = h/rh

 526   CONTINUE

 C

       CALL ddastp(tn,y,yprime,neq,

      *   res,jac,h,rwork(lwt),info(1),idid,rpar,ipar,

      *   rwork(lphi),rwork(ldelta),rwork(le),

      *   rwork(lwm),iwork(liwm),

      *   rwork(lalpha),rwork(lbeta),rwork(lgamma),

      *   rwork(lpsi),rwork(lsigma),

      *   rwork(lcj),rwork(lcjold),rwork(lhold),

      *   rwork(ls),hmin,rwork(lround),

      *   iwork(lphase),iwork(ljcalc),iwork(lk),

      *   iwork(lkold),iwork(lns),info(10),ntemp)

 527   IF(idid.LT.0)GO TO 600

 C

 C--------------------------------------------------------

 C     THIS BLOCK HANDLES THE CASE OF A SUCCESSFUL RETURN

 C     FROM DDASTP (IDID=1).  TEST FOR STOP CONDITIONS.

 C--------------------------------------------------------

 C

       IF(ng .EQ. 0) GO TO 529

 C

 C     Check for a zero of G near TN.

 C

       CALL drchek(3,g,ng,neq,tn,tout,y,rwork(le),rwork(lphi),

      *  rwork(lpsi),iwork(lkold),rwork(lg0),rwork(lg1),

      *  rwork(lgx),jroot,irt,rwork(lround),info(3),

      *  rwork,iwork,rpar,ipar)

       IF(irt .NE. 1) GO TO 529

       iwork(lirfnd) = 1

       idid = 4

       t = rwork(lt0)

       GO TO 580

 C

 529   CONTINUE

       IF(info(4).NE.0)GO TO 540

            IF(info(3).NE.0)GO TO 530

              IF((tn-tout)*h.LT.0.0d0)GO TO 500

              CALL ddatrp(tn,tout,y,yprime,neq,

      *         iwork(lkold),rwork(lphi),rwork(lpsi))

              idid=3

              t=tout

              GO TO 580

 530          IF((tn-tout)*h.GE.0.0d0)GO TO 535

              t=tn

              idid=1

              GO TO 580

 535          CALL ddatrp(tn,tout,y,yprime,neq,

      *         iwork(lkold),rwork(lphi),rwork(lpsi))

              idid=3

              t=tout

              GO TO 580

 540   IF(info(3).NE.0)GO TO 550

       IF((tn-tout)*h.LT.0.0d0)GO TO 542

          CALL ddatrp(tn,tout,y,yprime,neq,

      *     iwork(lkold),rwork(lphi),rwork(lpsi))

          t=tout

          idid=3

          GO TO 580

 542   IF(dabs(tn-tstop).LE.100.0d0*uround*

      *   (dabs(tn)+dabs(h)))GO TO 545

       tnext=tn+h

       IF((tnext-tstop)*h.LE.0.0d0)GO TO 500

       h=tstop-tn

       GO TO 500

 545   CALL ddatrp(tn,tstop,y,yprime,neq,

      *  iwork(lkold),rwork(lphi),rwork(lpsi))

       idid=2

       t=tstop

       GO TO 580

 550   IF((tn-tout)*h.GE.0.0d0)GO TO 555

       IF(dabs(tn-tstop).LE.100.0d0*uround*(dabs(tn)+dabs(h)))GO TO 552

       t=tn

       idid=1

       GO TO 580

 552   CALL ddatrp(tn,tstop,y,yprime,neq,

      *  iwork(lkold),rwork(lphi),rwork(lpsi))

       idid=2

       t=tstop

       GO TO 580

 555   CALL ddatrp(tn,tout,y,yprime,neq,

      *   iwork(lkold),rwork(lphi),rwork(lpsi))

       t=tout

       idid=3

 580   CONTINUE

 C

 C--------------------------------------------------------

 C     ALL SUCCESSFUL RETURNS FROM DDASRT ARE MADE FROM

 C     THIS BLOCK.

 C--------------------------------------------------------

 C

 590   CONTINUE

       rwork(ltn)=tn

       rwork(lh)=h

       rwork(ltlast) = t

       RETURN

 C

 C-----------------------------------------------------------------------

 C     THIS BLOCK HANDLES ALL UNSUCCESSFUL

 C     RETURNS OTHER THAN FOR ILLEGAL INPUT.

 C-----------------------------------------------------------------------

 C

 600   CONTINUE

       itemp=-idid

       GO TO (610,620,630,690,690,640,650,660,670,675,

      *  680,685), itemp

 C

 C     THE MAXIMUM NUMBER OF STEPS WAS TAKEN BEFORE

 C     REACHING TOUT

 610   msg = 'DASRT--  AT CURRENT T (=R1)  500 STEPS'

       CALL xerrwd(msg,38,610,0,0,0,0,1,tn,0.0d0)

       msg = 'DASRT--  TAKEN ON THIS CALL BEFORE REACHING TOUT'

       CALL xerrwd(msg,48,611,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     TOO MUCH ACCURACY FOR MACHINE PRECISION

 620   msg = 'DASRT--  AT T (=R1) TOO MUCH ACCURACY REQUESTED'

       CALL xerrwd(msg,47,620,0,0,0,0,1,tn,0.0d0)

       msg = 'DASRT--  FOR PRECISION OF MACHINE. RTOL AND ATOL'

       CALL xerrwd(msg,48,621,0,0,0,0,0,0.0d0,0.0d0)

       msg = 'DASRT--  WERE INCREASED TO APPROPRIATE VALUES'

       CALL xerrwd(msg,45,622,0,0,0,0,0,0.0d0,0.0d0)

 C

       GO TO 690

 C     WT(I) .LE. 0.0D0 FOR SOME I (NOT AT START OF PROBLEM)

 630   msg = 'DASRT--  AT T (=R1) SOME ELEMENT OF WT'

       CALL xerrwd(msg,38,630,0,0,0,0,1,tn,0.0d0)

       msg = .LE.'DASRT--  HAS BECOME  0.0'

       CALL xerrwd(msg,28,631,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     ERROR TEST FAILED REPEATEDLY OR WITH H=HMIN

 640   msg = 'DASRT--  AT T (=R1) AND STEPSIZE H (=R2) THE'

       CALL xerrwd(msg,44,640,0,0,0,0,2,tn,h)

       msg='DASRT--  ERROR TEST FAILED REPEATEDLY OR WITH ABS(H)=HMIN'

       CALL xerrwd(msg,57,641,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     CORRECTOR CONVERGENCE FAILED REPEATEDLY OR WITH H=HMIN

 650   msg = 'DASRT--  AT T (=R1) AND STEPSIZE H (=R2) THE'

       CALL xerrwd(msg,44,650,0,0,0,0,2,tn,h)

       msg = 'DASRT--  CORRECTOR FAILED TO CONVERGE REPEATEDLY'

       CALL xerrwd(msg,48,651,0,0,0,0,0,0.0d0,0.0d0)

       msg = 'DASRT--  OR WITH ABS(H)=HMIN'

       CALL xerrwd(msg,28,652,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     THE ITERATION MATRIX IS SINGULAR

 660   msg = 'DASRT--  AT T (=R1) AND STEPSIZE H (=R2) THE'

       CALL xerrwd(msg,44,660,0,0,0,0,2,tn,h)

       msg = 'DASRT--  ITERATION MATRIX IS SINGULAR'

       CALL xerrwd(msg,37,661,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     CORRECTOR FAILURE PRECEEDED BY ERROR TEST FAILURES.

 670   msg = 'DASRT--  AT T (=R1) AND STEPSIZE H (=R2) THE'

       CALL xerrwd(msg,44,670,0,0,0,0,2,tn,h)

       msg = 'DASRT--  CORRECTOR COULD NOT CONVERGE.  ALSO, THE'

       CALL xerrwd(msg,49,671,0,0,0,0,0,0.0d0,0.0d0)

       msg = 'DASRT--  ERROR TEST FAILED REPEATEDLY.'

       CALL xerrwd(msg,38,672,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     CORRECTOR FAILURE BECAUSE IRES = -1

 675   msg = 'DASRT--  AT T (=R1) AND STEPSIZE H (=R2) THE'

       CALL xerrwd(msg,44,675,0,0,0,0,2,tn,h)

       msg = 'DASRT--  CORRECTOR COULD NOT CONVERGE BECAUSE'

       CALL xerrwd(msg,45,676,0,0,0,0,0,0.0d0,0.0d0)

       msg = 'DASRT--  IRES WAS EQUAL TO MINUS ONE'

       CALL xerrwd(msg,36,677,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     FAILURE BECAUSE IRES = -2

 680   msg = 'DASRT--  AT T (=R1) AND STEPSIZE H (=R2)'

       CALL xerrwd(msg,40,680,0,0,0,0,2,tn,h)

       msg = 'DASRT--  IRES WAS EQUAL TO MINUS TWO'

       CALL xerrwd(msg,36,681,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 C

 C     FAILED TO COMPUTE INITIAL YPRIME

 685   msg = 'DASRT--  AT T (=R1) AND STEPSIZE H (=R2) THE'

       CALL xerrwd(msg,44,685,0,0,0,0,2,tn,ho)

       msg = 'DASRT--  INITIAL YPRIME COULD NOT BE COMPUTED'

       CALL xerrwd(msg,45,686,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 690

 690   CONTINUE

       info(1)=-1

       t=tn

       rwork(ltn)=tn

       rwork(lh)=h

       RETURN

 C-----------------------------------------------------------------------

 C     THIS BLOCK HANDLES ALL ERROR RETURNS DUE

 C     TO ILLEGAL INPUT, AS DETECTED BEFORE CALLING

 C     DDASTP. FIRST THE ERROR MESSAGE ROUTINE IS

 C     CALLED. IF THIS HAPPENS TWICE IN

 C     SUCCESSION, EXECUTION IS TERMINATED

 C

 C-----------------------------------------------------------------------

 701   msg = 'DASRT--  SOME ELEMENT OF INFO VECTOR IS NOT ZERO OR ONE'

       CALL xerrwd(msg,55,1,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 750

 702   msg = .LE.'DASRT--  NEQ (=I1)  0'

       CALL xerrwd(msg,25,2,0,1,neq,0,0,0.0d0,0.0d0)

       GO TO 750

 703   msg = 'DASRT--  MAXORD (=I1) NOT IN RANGE'

       CALL xerrwd(msg,34,3,0,1,mxord,0,0,0.0d0,0.0d0)

       GO TO 750

 704   msg='DASRT--  RWORK LENGTH NEEDED, LENRW (=I1), EXCEEDS LRW (=I2)'

       CALL xerrwd(msg,60,4,0,2,lenrw,lrw,0,0.0d0,0.0d0)

       GO TO 750

 705   msg='DASRT--  IWORK LENGTH NEEDED, LENIW (=I1), EXCEEDS LIW (=I2)'

       CALL xerrwd(msg,60,5,0,2,leniw,liw,0,0.0d0,0.0d0)

       GO TO 750

 706   msg = .LT.'DASRT--  SOME ELEMENT OF RTOL IS  0'

       CALL xerrwd(msg,39,6,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 750

 707   msg = .LT.'DASRT--  SOME ELEMENT OF ATOL IS  0'

       CALL xerrwd(msg,39,7,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 750

 708   msg = 'DASRT--  ALL ELEMENTS OF RTOL AND ATOL ARE ZERO'

       CALL xerrwd(msg,47,8,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 750

 709   msg='DASRT--  INFO(4) = 1 AND TSTOP (=R1) BEHIND TOUT (=R2)'

       CALL xerrwd(msg,54,9,0,0,0,0,2,tstop,tout)

       GO TO 750

 710   msg = .LT.'DASRT--  HMAX (=R1)  0.0'

       CALL xerrwd(msg,28,10,0,0,0,0,1,hmax,0.0d0)

       GO TO 750

 711   msg = 'DASRT--  TOUT (=R1) BEHIND T (=R2)'

       CALL xerrwd(msg,34,11,0,0,0,0,2,tout,t)

       GO TO 750

 712   msg = 'DASRT--  INFO(8)=1 AND H0=0.0'

       CALL xerrwd(msg,29,12,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 750

 713   msg = .LE.'DASRT--  SOME ELEMENT OF WT IS  0.0'

       CALL xerrwd(msg,39,13,0,0,0,0,0,0.0d0,0.0d0)

       GO TO 750

 714   msg='DASRT-- TOUT (=R1) TOO CLOSE TO T (=R2) TO START INTEGRATION'

       CALL xerrwd(msg,60,14,0,0,0,0,2,tout,t)

       GO TO 750

 715   msg = 'DASRT--  INFO(4)=1 AND TSTOP (=R1) BEHIND T (=R2)'

       CALL xerrwd(msg,49,15,0,0,0,0,2,tstop,t)

       GO TO 750

 716   msg = .LT.'DASRT--  INFO(12)=1 AND MXSTP (=I1)  0'

       CALL xerrwd(msg,42,16,0,1,iwork(lmxstp),0,0,0.0d0,0.0d0)

       GO TO 750

 717   msg = .LT..GT.'DASRT--  ML (=I1) ILLEGAL. EITHER  0 OR  NEQ'

       CALL xerrwd(msg,52,17,0,1,iwork(lml),0,0,0.0d0,0.0d0)

       GO TO 750

 718   msg = .LT..GT.'DASRT--  MU (=I1) ILLEGAL. EITHER  0 OR  NEQ'

       CALL xerrwd(msg,52,18,0,1,iwork(lmu),0,0,0.0d0,0.0d0)

       GO TO 750

 719   msg = 'DASRT--  TOUT (=R1) IS EQUAL TO T (=R2)'

       CALL xerrwd(msg,39,19,0,0,0,0,2,tout,t)

       GO TO 750

 730   msg = .LT.'DASRT--  NG (=I1)  0'

       CALL xerrwd(msg,24,30,1,1,ng,0,0,0.0d0,0.0d0)

       GO TO 750

 732   msg = 'DASRT--  ONE OR MORE COMPONENTS OF G HAS A ROOT'

       CALL xerrwd(msg,47,32,1,0,0,0,0,0.0d0,0.0d0)

       msg = '         TOO NEAR TO THE INITIAL POINT'

       CALL xerrwd(msg,38,32,1,0,0,0,0,0.0d0,0.0d0)

 750   IF(info(1).EQ.-1) GO TO 760

       info(1)=-1

       idid=-33

       RETURN

 760   msg = 'DASRT--  REPEATED OCCURRENCES OF ILLEGAL INPUT'

       CALL xerrwd(msg,46,801,0,0,0,0,0,0.0d0,0.0d0)

 770   msg = 'DASRT--  RUN TERMINATED. APPARENT INFINITE LOOP'

       CALL xerrwd(msg,47,802,1,0,0,0,0,0.0d0,0.0d0)

       RETURN

 C-----------END OF SUBROUTINE DDASRT------------------------------------

       END

d1mach
double precision function d1mach(i)
Definition: d1mach.f:23

ddaini
subroutine ddaini(X, Y, YPRIME, NEQ, RES, JAC, H, WT, IDID, RPAR, IPAR, PHI, DELTA, E, WM, IWM, HMIN, UROUND, NONNEG, NTEMP)
Definition: ddaini.f:3

ddanrm
double precision function ddanrm(NEQ, V, WT, RPAR, IPAR)
Definition: ddanrm.f:2

ddasrt
subroutine ddasrt(RES, NEQ, T, Y, YPRIME, TOUT, INFO, RTOL, ATOL, IDID, RWORK, LRW, IWORK, LIW, RPAR, IPAR, JAC, G, NG, JROOT)
Definition: ddasrt.f:4

ddastp
subroutine ddastp(X, Y, YPRIME, NEQ, RES, JAC, H, WT, JSTART, IDID, RPAR, IPAR, PHI, DELTA, E, WM, IWM, ALPHA, BETA, GAMMA, PSI, SIGMA, CJ, CJOLD, HOLD, S, HMIN, UROUND, IPHASE, JCALC, K, KOLD, NS, NONNEG, NTEMP)
Definition: ddastp.f:5

ddatrp
subroutine ddatrp(X, XOUT, YOUT, YPOUT, NEQ, KOLD, PHI, PSI)
Definition: ddatrp.f:2

ddawts
subroutine ddawts(NEQ, IWT, RTOL, ATOL, Y, WT, RPAR, IPAR)
Definition: ddawts.f:2

drchek
subroutine drchek(JOB, G, NG, NEQ, TN, TOUT, Y, YP, PHI, PSI, KOLD, G0, G1, GX, JROOT, IRT, UROUND, INFO3, RWORK, IWORK, RPAR, IPAR)
Definition: drchek.f:4

abs
static T abs(T x)
Definition: pr-output.cc:1678

xerrwd
subroutine xerrwd(MSG, NMES, NERR, LEVEL, NI, I1, I2, NR, R1, R2)
Definition: xerrwd.f:4