Next: String Conversions, Previous: Comparing Strings, Up: Strings [Contents][Index]
Octave supports a wide range of functions for manipulating strings. Since a string is just a matrix, simple manipulations can be accomplished using standard operators. The following example shows how to replace all blank characters with underscores.
quote = ...
"First things first, but not necessarily in that order";
quote( quote == " " ) = "_"
⇒ quote =
First_things_first,_but_not_necessarily_in_that_order
For more complex manipulations, such as searching, replacing, and general regular expressions, the following functions come with Octave.
Remove trailing whitespace and nulls from s.
If s is a matrix, deblank trims each row to the length of longest string. If s is a cell array of strings, operate recursively on each string element.
Examples:
deblank (" abc ")
⇒ " abc"
deblank ([" abc "; " def "])
⇒ [" abc " ; " def"]
See also: strtrim.
Remove leading and trailing whitespace from s.
If s is a matrix, strtrim trims each row to the length of longest string. If s is a cell array of strings, operate recursively on each string element.
For example:
strtrim (" abc ")
⇒ "abc"
strtrim ([" abc "; " def "])
⇒ ["abc " ; " def"]
See also: deblank.
Truncate the character string s to length n.
If s is a character matrix, then the number of columns is adjusted.
If s is a cell array of strings, then the operation is performed on each cell element and the new cell array is returned.
Return the vector of all positions in the longer of the two strings s and t where an occurrence of the shorter of the two starts.
If the optional argument overlap is true (default), the returned vector can include overlapping positions. For example:
findstr ("ababab", "a")
⇒ [1, 3, 5];
findstr ("abababa", "aba", 0)
⇒ [1, 5]
Caution: findstr is scheduled for deprecation. Use
strfind in all new code.
See also: strfind, strmatch, strcmp, strncmp, strcmpi, strncmpi, find.
Search for the string str for occurrences of characters from the set chars.
The return value(s), as well as the n and direction arguments
behave identically as in find.
This will be faster than using regexp in most cases.
See also: find.
Return the position of the first occurrence of the string t in the string s, or 0 if no occurrence is found.
s may also be a string array or cell array of strings.
For example:
index ("Teststring", "t")
⇒ 4
If direction is "first", return the first element found.
If direction is "last", return the last element found.
Return the position of the last occurrence of the character string t in the character string s, or 0 if no occurrence is found.
s may also be a string array or cell array of strings.
For example:
rindex ("Teststring", "t")
⇒ 6
The rindex function is equivalent to index with
direction set to "last".
Search for pattern in the string str and return the starting index of every such occurrence in the vector idx.
If there is no such occurrence, or if pattern is longer than
str, or if pattern itself is empty, then idx is the empty
array [].
The optional argument "overlaps" determines whether the pattern
can match at every position in str (true), or only for unique
occurrences of the complete pattern (false). The default is true.
If a cell array of strings cellstr is specified then idx is a cell array of vectors, as specified above.
Examples:
strfind ("abababa", "aba")
⇒ [1, 3, 5]
strfind ("abababa", "aba", "overlaps", false)
⇒ [1, 5]
strfind ({"abababa", "bebebe", "ab"}, "aba")
⇒
{
[1,1] =
1 3 5
[1,2] = [](1x0)
[1,3] = [](1x0)
}
Join the elements of the cell string array, cstr, into a single string.
If no delimiter is specified, the elements of cstr are separated by a space.
If delimiter is specified as a string, the cell string array is joined using the string. Escape sequences are supported.
If delimiter is a cell string array whose length is one less than cstr, then the elements of cstr are joined by interleaving the cell string elements of delimiter. Escape sequences are not supported.
strjoin ({'Octave','Scilab','Lush','Yorick'}, '*')
⇒ 'Octave*Scilab*Lush*Yorick'
See also: strsplit.
Return indices of entries of A which begin with the string s.
The second argument A must be a string, character matrix, or a cell array of strings.
If the third argument "exact" is not given, then s only
needs to match A up to the length of s. Trailing spaces and
nulls in s and A are ignored when matching.
For example:
strmatch ("apple", "apple juice")
⇒ 1
strmatch ("apple", ["apple "; "apple juice"; "an apple"])
⇒ [1; 2]
strmatch ("apple", ["apple "; "apple juice"; "an apple"], "exact")
⇒ [1]
Caution: strmatch is scheduled for deprecation. Use
strncmp (normal case), or strcmp ("exact" case), or
regexp in all new code.
See also: strfind, findstr, strcmp, strncmp, strcmpi, strncmpi, find.
Find all characters in the string str up to, but not including, the first character which is in the string delim.
str may also be a cell array of strings in which case the function executes on every individual string and returns a cell array of tokens and remainders.
Leading delimiters are ignored. If delim is not specified, whitespace is assumed.
If rem is requested, it contains the remainder of the string, starting at the first delimiter.
Examples:
strtok ("this is the life")
⇒ "this"
[tok, rem] = strtok ("14*27+31", "+-*/")
⇒
tok = 14
rem = *27+31
Split the string str using the delimiters specified by del and return a cell string array of substrings.
If a delimiter is not specified the string is split at whitespace
{" ", "\f", "\n", "\r", "\t", "\v"}. Otherwise, the delimiter,
del must be a string or cell array of strings. By default,
consecutive delimiters in the input string s are collapsed into one
resulting in a single split.
Supported name/value pair arguments are:
true
(default) or false.
"simple"
(default) or "regularexpression". A simple delimiter
matches the text exactly as written. Otherwise, the syntax for regular
expressions outlined in regexp is used.
The optional second output, matches, returns the delimiters which were matched in the original string.
Examples with simple delimiters:
strsplit ("a b c")
⇒
{
[1,1] = a
[1,2] = b
[1,3] = c
}
strsplit ("a,b,c", ",")
⇒
{
[1,1] = a
[1,2] = b
[1,3] = c
}
strsplit ("a foo b,bar c", {" ", ",", "foo", "bar"})
⇒
{
[1,1] = a
[1,2] = b
[1,3] = c
}
strsplit ("a,,b, c", {",", " "}, "collapsedelimiters", false)
⇒
{
[1,1] = a
[1,2] =
[1,3] = b
[1,4] =
[1,5] = c
}
Examples with regularexpression delimiters:
strsplit ("a foo b,bar c", ',|\s|foo|bar', "delimitertype", "regularexpression")
⇒
{
[1,1] = a
[1,2] = b
[1,3] = c
}
strsplit ("a,,b, c", '[, ]', "collapsedelimiters", false, "delimitertype", "regularexpression")
⇒
{
[1,1] = a
[1,2] =
[1,3] = b
[1,4] =
[1,5] = c
}
strsplit ("a,\t,b, c", {',', '\s'}, "delimitertype", "regularexpression")
⇒
{
[1,1] = a
[1,2] = b
[1,3] = c
}
strsplit ("a,\t,b, c", {',', ' ', '\t'}, "collapsedelimiters", false)
⇒
{
[1,1] = a
[1,2] =
[1,3] =
[1,4] = b
[1,5] =
[1,6] = c
}
Split the string s using one or more separators sep and return a cell array of strings.
Consecutive separators and separators at boundaries result in empty strings, unless strip_empty is true. The default value of strip_empty is false.
2-D character arrays are split at separators and at the original column boundaries.
Example:
ostrsplit ("a,b,c", ",")
⇒
{
[1,1] = a
[1,2] = b
[1,3] = c
}
ostrsplit (["a,b" ; "cde"], ",")
⇒
{
[1,1] = a
[1,2] = b
[1,3] = cde
}
Read data from a string.
The string str is split into words that are repeatedly matched to the specifiers in format. The first word is matched to the first specifier, the second to the second specifier and so forth. If there are more words than specifiers, the process is repeated until all words have been processed.
The string format describes how the words in str should be parsed. It may contain any combination of the following specifiers:
%sThe word is parsed as a string.
%f%nThe word is parsed as a number and converted to double.
%d%uThe word is parsed as a number and converted to int32.
%*', '%*f', '%*sThe word is skipped.
For %s and %d, %f, %n, %u and the associated %*s … specifiers an optional width can be specified as %Ns, etc. where N is an integer > 1. For %f, format specifiers like %N.Mf are allowed.
literalsIn addition the format may contain literal character strings; these will be skipped during reading.
Parsed word corresponding to the first specifier are returned in the first output argument and likewise for the rest of the specifiers.
By default, format is "%f", meaning that numbers are read from str. This will do if str contains only numeric fields.
For example, the string
str = "\ Bunny Bugs 5.5\n\ Duck Daffy -7.5e-5\n\ Penguin Tux 6"
can be read using
[a, b, c] = strread (str, "%s %s %f");
Optional numeric argument format_repeat can be used for limiting the number of items read:
(default) read all of the string until the end.
Read N times nargout items. 0 (zero) is an acceptable value for format_repeat.
The behavior of strread can be changed via property-value pairs. The
following properties are recognized:
"commentstyle"Parts of str are considered comments and will be skipped. value is the comment style and can be any of the following.
"shell"
Everything from # characters to the nearest end-of-line is skipped.
"c"
Everything between /* and */ is skipped.
"c++"
Everything from // characters to the nearest end-of-line is skipped.
"matlab"
Everything from % characters to the nearest end-of-line is skipped.
"delimiter"Any character in value will be used to split str into words
(default value = any whitespace). Note that whitespace is implicitly added
to the set of delimiter characters unless a "%s" format conversion
specifier is supplied; see "whitespace" parameter below. The set
of delimiter characters cannot be empty; if needed Octave substitutes a
space as delimiter.
"emptyvalue"Value to return for empty numeric values in non-whitespace delimited data. The default is NaN. When the data type does not support NaN (int32 for example), then default is zero.
"multipledelimsasone"Treat a series of consecutive delimiters, without whitespace in between,
as a single delimiter. Consecutive delimiter series need not be vertically
"aligned".
"treatasempty"Treat single occurrences (surrounded by delimiters or whitespace) of the string(s) in value as missing values.
"returnonerror"If value true (1, default), ignore read errors and return normally. If false (0), return an error.
"whitespace"Any character in value will be interpreted as whitespace and trimmed;
the string defining whitespace must be enclosed in double quotes for proper
processing of special characters like "\t". In
each data field, multiple consecutive whitespace characters are collapsed
into one space and leading and trailing whitespace is removed. The default
value for whitespace is
"
\b\r\n\t"
(note the space). Whitespace is always added to the set of delimiter
characters unless at least one "%s" format conversion specifier is
supplied; in that case only whitespace explicitly specified in
"delimiter" is retained as delimiter and removed from the set of
whitespace characters. If whitespace characters are to be kept as-is (in
e.g., strings), specify an empty value (i.e., "") for
"whitespace"; obviously, whitespace cannot be a delimiter then.
When the number of words in str doesn’t match an exact multiple of the number of format conversion specifiers, strread’s behavior depends on the last character of str:
"\n"Data columns are padded with empty fields or Nan so that all columns have equal length
"\n"Data columns are not padded; strread returns columns of unequal length
Replace all occurrences of the pattern ptn in the string str with the string rep and return the result.
The optional argument "overlaps" determines whether the pattern
can match at every position in str (true), or only for unique
occurrences of the complete pattern (false). The default is true.
s may also be a cell array of strings, in which case the replacement is done for each element and a cell array is returned.
Example:
strrep ("This is a test string", "is", "&%$")
⇒ "Th&%$ &%$ a test string"
Return the substring of s which starts at character number offset and is len characters long.
Position numbering for offsets begins with 1. If offset is negative, extraction starts that far from the end of the string.
If len is omitted, the substring extends to the end of s. A negative value for len extracts to within len characters of the end of the string
Examples:
substr ("This is a test string", 6, 9)
⇒ "is a test"
substr ("This is a test string", -11)
⇒ "test string"
substr ("This is a test string", -11, -7)
⇒ "test"
This function is patterned after the equivalent function in Perl.
Regular expression string matching.
Search for pat in str and return the positions and substrings of any matches, or empty values if there are none.
The matched pattern pat can include any of the standard regex operators, including:
.Match any character
* + ? {}Repetition operators, representing
*Match zero or more times
+Match one or more times
?Match zero or one times
{n}Match exactly n times
{n,}Match n or more times
{m,n}Match between m and n times
[…] [^…]List operators. The pattern will match any character listed between
"[" and "]". If the first character is "^" then the
pattern is inverted and any character except those listed between brackets
will match.
Escape sequences defined below can also be used inside list operators. For
example, a template for a floating point number might be [-+.\d]+.
() (?:)Grouping operator. The first form, parentheses only, also creates a token.
|Alternation operator. Match one of a choice of regular expressions. The
alternatives must be delimited by the grouping operator () above.
^ $Anchoring operators. Requires pattern to occur at the start (^) or
end ($) of the string.
In addition, the following escaped characters have special meaning.
\dMatch any digit
\DMatch any non-digit
\sMatch any whitespace character
\SMatch any non-whitespace character
\wMatch any word character
\WMatch any non-word character
\<Match the beginning of a word
\>Match the end of a word
\BMatch within a word
Implementation Note: For compatibility with MATLAB, escape sequences
in pat (e.g., "\n" => newline) are expanded
even when pat has been defined with single quotes. To disable
expansion use a second backslash before the escape sequence (e.g.,
"\\n") or use the regexptranslate
function.
The outputs of regexp default to the order given below
The start indices of each matching substring
The end indices of each matching substring
The extents of each matched token surrounded by (…) in
pat
A cell array of the text of each match
A cell array of the text of each token matched
A structure containing the text of each matched named token, with the name
being used as the fieldname. A named token is denoted by
(?<name>…).
A cell array of the text not returned by match, i.e., what remains if you split the string based on pat.
Particular output arguments, or the order of the output arguments, can be selected by additional opt arguments. These are strings and the correspondence between the output arguments and the optional argument are
'start' | s | ||
'end' | e | ||
'tokenExtents' | te | ||
'match' | m | ||
'tokens' | t | ||
'names' | nm | ||
'split' | sp |
Additional arguments are summarized below.
Return only the first occurrence of the pattern.
Make the matching case sensitive. (default)
Alternatively, use (?-i) in the pattern.
Ignore case when matching the pattern to the string.
Alternatively, use (?i) in the pattern.
Match the anchor characters at the beginning and end of the string. (default)
Alternatively, use (?-m) in the pattern.
Match the anchor characters at the beginning and end of the line.
Alternatively, use (?m) in the pattern.
The pattern . matches all characters including the newline character.
(default)
Alternatively, use (?s) in the pattern.
The pattern . matches all characters except the newline character.
Alternatively, use (?-s) in the pattern.
All characters in the pattern, including whitespace, are significant and are used in pattern matching. (default)
Alternatively, use (?-x) in the pattern.
The pattern may include arbitrary whitespace and also comments beginning with the character ‘#’.
Alternatively, use (?x) in the pattern.
Zero-length matches are not returned. (default)
Return zero-length matches.
regexp ('a', 'b*', 'emptymatch') returns [1 2] because there
are zero or more 'b' characters at positions 1 and end-of-string.
Case insensitive regular expression string matching.
Search for pat in str and return the positions and substrings of any matches, or empty values if there are none. See regexp, for details on the syntax of the search pattern.
See also: regexp.
Replace occurrences of pattern pat in string with repstr.
The pattern is a regular expression as documented for regexp.
See regexp.
The replacement string may contain $i, which substitutes for the ith
set of parentheses in the match string. For example,
regexprep ("Bill Dunn", '(\w+) (\w+)', '$2, $1')
returns "Dunn, Bill"
Options in addition to those of regexp are
Replace only the first occurrence of pat in the result.
This option is present for compatibility but is ignored.
Implementation Note: For compatibility with MATLAB, escape sequences
in pat (e.g., "\n" => newline) are expanded
even when pat has been defined with single quotes. To disable
expansion use a second backslash before the escape sequence (e.g.,
"\\n") or use the regexptranslate
function.
Translate a string for use in a regular expression.
This may include either wildcard replacement or special character escaping.
The behavior is controlled by op which can take the following values
"wildcard"The wildcard characters ., *, and ? are replaced with
wildcards that are appropriate for a regular expression. For example:
regexptranslate ("wildcard", "*.m")
⇒ ".*\.m"
"escape"The characters $.?[], that have special meaning for regular
expressions are escaped so that they are treated literally. For example:
regexptranslate ("escape", "12.5")
⇒ "12\.5"
Replace TAB characters in t with spaces.
The input, t, may be either a 2-D character array, or a cell array of character strings. The output is the same class as the input.
The tab width is specified by tw, and defaults to eight.
If the optional argument deblank is true, then the spaces will be removed from the end of the character data.
The following example reads a file and writes an untabified version of the same file with trailing spaces stripped.
fid = fopen ("tabbed_script.m");
text = char (fread (fid, "uchar")');
fclose (fid);
fid = fopen ("untabified_script.m", "w");
text = untabify (strsplit (text, "\n"), 8, true);
fprintf (fid, "%s\n", text{:});
fclose (fid);
Next: String Conversions, Previous: Comparing Strings, Up: Strings [Contents][Index]